Digital manometer and logger
26 September, 2005 | Technical & Scientific Equipment
The Keller Leo-Record and Leo-Record EEx ia are compact digital instruments that measure both pressure and temperature. They are suitable for use in factories and pipelines. Up to 57,000 readings can be stored in their non-volatile memory.
Chemical-free water treatment
17 August, 2005 | Imatech
The VRTX chemical-free water-treatment technology is based on colliding two rotating water streams at very high speeds and the resulting hydrodynamic cavitation causing intense, microscopic localised extremes of temperature and pressure. Chemical reactions are forced to proceed under these conditions.
Metered dose tap
17 August, 2005 | Molly Polly Innovations Pty Ltd
The Divvy Tap allows users to accurately measure any liquid ensuring a correct dilution and reducing chemical waste. The tap is highly adaptable, fitting a range of container sizes and dispensing accurately.
Wastewater aeration diffusers
17 August, 2005 | MRE Industries
The Airflex range of aeration diffusers has expanded to include a diffuser for the wastewater industry. The membrane diffuser is a combination of EPDM rubber and teflon (PTFE).
Sewer odour control
17 August, 2005 | Odour Control Systems Australia Pty Ltd
The OCS Ferrogard systems comprise a range of automated flow-paced chemical dosing units for sewer odour control. They are available in a range of sizes allowing for a whole-of-system approach from small flows in upstream catchments through to large carrier mains.
Recycling mining equipment
17 August, 2005 | Meek Holdings
The www.minegraveyard.com website is an advertising medium for surplus mining equipment. It is designed to be used by mining companies and mining service providers to advertise any equipment as long as it is being used within the mining industry.
Oil spill response training
17 August, 2005 | Global Spill Control
The Three CCC's Oil Spills on Land training course is designed to instruct personnel to safely and practically respond to minor spills within the workshop, factory, plant or work area using correct procedures, equipment and conventions.
Insite IG dissolved oxygen measurement
17 August, 2005 | EnviroEquip Pty Ltd
Insite IG has developed a dissolved oxygen measurement system, based on optical fluorescence technology. The system is designed for the harsh environment of wastewater treatment plants, and has also found use in other applications such as environmental monitoring, process waters and aquaculture.
Office baler
17 August, 2005 | Orwak Solutions Pty Ltd
The electro-hydraulic EMB60 Mini Baler is suitable for landscaped offices, showrooms and canteen areas. Finished in polished aluminium with a modern design, it has a low noise level of 55 dB and delivers 1.5 tonne of force. It has a neat appearance and runs on a standard 10 A single-phase power point.
Differential pressure controller
26 July, 2005 | Dwyer Instruments (Aust) Pty Ltd
The Series DH DigiHelic differential pressure controller is suitable for pressure, velocity and flow applications, achieving a 0.5% full scale accuracy on ranges from 0.25 in wc to 100 in wc. It provides a 4-20 mA process output, 2 SPDT relays with adjustable dead bands, and selection of pressure, velocity or flow operation.
Small-sized decanter
26 July, 2005 | Alfa Laval NZ Ltd
The Aldec 10 small-sized decanter is suited to dewater-ing and thickening needs of small capacity wastewater treatment plants and potable water treatment plants. It is suitable for small and medium-sized industries.
Gas monitor management and service
26 July, 2005 | Air Met Scientific Pty Ltd
The iNet Instrument Network eliminates most of the cost-intensive and time-consuming tasks involved with managing a gas monitor fleet.
Borehole pressure transducer
26 July, 2005 | Control Components Pty Ltd
Gems Sensors' 2400 slim line pressure transducer measures 19 mm in diameter and features triple sealing to prevent water ingress and condensation. The unit is designed for use in water industry applications, such as level measurement in bore holes.
Blocking valve
26 July, 2005 | Griffiths Components Pty Ltd
Camozzi's series of blocking valves can be used to enhance the safety of many pneumatic applications by permitting movement of cylinders only when a control signal is present. This control signal could be generated via interlocks indicating, for example, when a guard is in its closed position.