Office baler
17 August, 2005 | Orwak Solutions Pty Ltd
The electro-hydraulic EMB60 Mini Baler is suitable for landscaped offices, showrooms and canteen areas. Finished in polished aluminium with a modern design, it has a low noise level of 55 dB and delivers 1.5 tonne of force. It has a neat appearance and runs on a standard 10 A single-phase power point.
Metered dose tap
17 August, 2005 | Molly Polly Innovations Pty Ltd
The Divvy Tap allows users to accurately measure any liquid ensuring a correct dilution and reducing chemical waste. The tap is highly adaptable, fitting a range of container sizes and dispensing accurately.
Sewer odour control
17 August, 2005 | Odour Control Systems Australia Pty Ltd
The OCS Ferrogard systems comprise a range of automated flow-paced chemical dosing units for sewer odour control. They are available in a range of sizes allowing for a whole-of-system approach from small flows in upstream catchments through to large carrier mains.
Differential pressure controller
26 July, 2005 | Dwyer Omega (Aust) Pty Ltd
The Series DH DigiHelic differential pressure controller is suitable for pressure, velocity and flow applications, achieving a 0.5% full scale accuracy on ranges from 0.25 in wc to 100 in wc. It provides a 4-20 mA process output, 2 SPDT relays with adjustable dead bands, and selection of pressure, velocity or flow operation.
Borehole pressure transducer
26 July, 2005 | Control Components Pty Ltd
Gems Sensors' 2400 slim line pressure transducer measures 19 mm in diameter and features triple sealing to prevent water ingress and condensation. The unit is designed for use in water industry applications, such as level measurement in bore holes.
Fault-finding modules
26 July, 2005 | Rockwell Automation Australia
Two new modules extend the Allen-Bradley Entek XM series of distributed protection and monitoring tools.
Wastewater conversion system
26 July, 2005 | H2O Worldwide Water Solutions
The H20 Pureplus system uses no chemicals, no complicated components and converts wastewater to clean water at a potable standard.
Turbo scrap chopper
26 July, 2005 | Fromm Packaging Australia
Sweed has introduced a scrap chopper for plastic strapping.
Blocking valve
26 July, 2005 | Griffiths Components Pty Ltd
Camozzi's series of blocking valves can be used to enhance the safety of many pneumatic applications by permitting movement of cylinders only when a control signal is present. This control signal could be generated via interlocks indicating, for example, when a guard is in its closed position.
Small-sized decanter
26 July, 2005 | Alfa Laval NZ Ltd
The Aldec 10 small-sized decanter is suited to dewater-ing and thickening needs of small capacity wastewater treatment plants and potable water treatment plants. It is suitable for small and medium-sized industries.
Gas monitor management and service
26 July, 2005 | Air Met Scientific Pty Ltd
The iNet Instrument Network eliminates most of the cost-intensive and time-consuming tasks involved with managing a gas monitor fleet.
Chemical resistant suits
25 July, 2005 | 360 Degrees Safety Pty Ltd
The chemical resistant suit model CS8 exceeds EN standards. It is water resistant and passes chemical spray tests against various chemicals such as paints, motor oils, sodium hydroxide, hazardous particulate matter, etc.
Solvent recovery unit
25 July, 2005 | The Novasys Group Pty Ltd
Ofru Recycling's solvent recovery system, the ASC-150 recycling unit, meets the strict ATEX European safety standard and contains an integrated steam heating system, rather than the conventional thermal oil heating system.
UV disinfection/sterilisation
24 June, 2005 | Ultraviolet Technology of Australia
The UVTA Terminator series UV units will kill disease-causing bacteria and viruses in water. It is used for UV disinfection/sterilisation for water and treated effluent.
