Multiple gas monitors
01 January, 2009 | Draeger Australia Pty. Ltd.
The X-am 2000 is a four-gas detector that reliably measures explosive gases and vapours, as well as H2, CO and H2S. It is suitable for confined space use and comes in a special case with charger, electronic pump and tubing.
Quiet baler
01 January, 2009 | Orwak Solutions Pty Ltd
Orwak 3610, which replaces the Orwak 3600, uses quiet, powerful hydraulics; the noise level is only about 60 dB.
Range of COD analysers launched
18 December, 2008 | Aqua Diagnostic Pty Ltd
Aqua Diagnostic’s PeCOD COD analysers are a technology for measuring COD (chemical oxygen demand).
Biodiesel analysis
01 December, 2008 | Thermo Fisher Scientific
The iCAP 6000 Series of inductively coupled plasma (ICP) emission spectrometers can be used for monitoring elemental contaminants in biodiesel.
Siemens Sitrans SL gas analyser
01 December, 2008 | Siemens Ltd
Siemens Sitrans SL is a diode laser gas analyser featuring an inline reference cell filled with a non-interfering reference gas. This allows for a fast and non-contact measurement of gas concentrations in process or flue gases.
Signal conditioners
01 December, 2008 | Burkert Contromatic NZ
The loop-powered eLine LPI signal conditioner works with most standard signal types, in one unit without jumpers (milliamps, millivolts, voltage, thermocouple, RTD, resistance and potential).
Spill containment unit
01 December, 2008 | Enware Australia Pty Ltd
The one-piece polyethylene IBC2000i intermediate bulk container (IBC) spill containment unit features a 144 (L) x 142 cm (W) footprint to fit most 1000 L IBC dispensing units. It also includes a 19 L pail holder for quick, easy dispensing into smaller containers.
Conductivity meter for high-purity water
01 December, 2008 | Practical Control Solutions
The GLF100RW conductivity meter is suitable for conductivity measurements in pure and ultra-pure water, boiler water, checking of ion exchangers, distilled water, deionised water, demineralised water and desalinated water.
End-suction pump
01 December, 2008 | Grundfos Pumps Pty Ltd
The Grundfos NBG/NKG end-suction pumps have energy-efficient motors that conform to the MEPS Standard. Optimised flow geometries of the impeller and pump casing have reduced the hydraulic friction and thus the amount of energy consumed.
Lift station and sewer treatment monitoring
01 December, 2008 | Measuring And Control Equipment Pty Ltd
Mace has released its next generation of meters with the FloPro series 3, which uses ultrasonic technology to measure water flows.
Fuel-saving system
01 December, 2008 | FuelSave Australia Pty Ltd
A fuel-saving system claimed to also cut engine wear and reduce environmental emissions from mobile and stationary diesel engines is being introduced to Australian industry by FuelSave.
Multiparameter water quality meter with GPS
01 December, 2008 | Hanna Instruments Pty Ltd
Hanna’s HI 98280 multiparameter portable meter with GPS receiver monitors up to 13 different water quality parameters (six measured, seven calculated).
Check-metering kit
01 December, 2008 | Siemens Ltd
The Sitrans FUP1010 is a portable clamp-on unit designed for the water and wastewater industry to measure the performance of existing flowmeters.
Tool for SCADA
01 December, 2008 | GE Intelligent Platforms Asia Pacific Pte Ltd
The Water Solution Pack 2008 delivers new tools and functionality for Proficy HMI/SCADA — iFIX users with the addition of an extensive industry-specific dynamo library, NERC-recommended security features and tighter integration with OPS Systems’ Water/Wastewater reporting software.
Energy efficiency for data centre
01 December, 2008 | Rittal Pty Ltd
Rittal, provide of IT infrastructure technologies, has launched a cold aisle containment system which enables data centre managers to increase energy efficiency by optimising the operating temperature of their IT equipment.