Check-metering kit
01 December, 2008 | Siemens Ltd
The Sitrans FUP1010 is a portable clamp-on unit designed for the water and wastewater industry to measure the performance of existing flowmeters.
Energy efficiency for data centre
01 December, 2008 | Rittal Pty Ltd
Rittal, provide of IT infrastructure technologies, has launched a cold aisle containment system which enables data centre managers to increase energy efficiency by optimising the operating temperature of their IT equipment.
Conductivity meter for high-purity water
01 December, 2008 | Practical Control Solutions
The GLF100RW conductivity meter is suitable for conductivity measurements in pure and ultra-pure water, boiler water, checking of ion exchangers, distilled water, deionised water, demineralised water and desalinated water.
Signal conditioners
01 December, 2008 | Burkert Contromatic NZ
The loop-powered eLine LPI signal conditioner works with most standard signal types, in one unit without jumpers (milliamps, millivolts, voltage, thermocouple, RTD, resistance and potential).
Greener networking
01 December, 2008 | Linksys
Linksys, a division of Cisco, has reduced packaging for its consumer networking products and it has received Energy Star certified ratings on power adapters included with more than 30 of its products.
Fuel-saving system
01 December, 2008 | FuelSave Australia Pty Ltd
A fuel-saving system claimed to also cut engine wear and reduce environmental emissions from mobile and stationary diesel engines is being introduced to Australian industry by FuelSave.
Multiparameter water quality meter with GPS
01 December, 2008 | Hanna Instruments Pty Ltd
Hanna’s HI 98280 multiparameter portable meter with GPS receiver monitors up to 13 different water quality parameters (six measured, seven calculated).
Lift station and sewer treatment monitoring
01 December, 2008 | Measuring And Control Equipment Pty Ltd
Mace has released its next generation of meters with the FloPro series 3, which uses ultrasonic technology to measure water flows.
Laser nephelometer
01 December, 2008 | Environmental & Process Technologies
Designed specifically to detect changes in turbidity as low as 0.0003 NTU (or 0.3 mNTU) the FilterTrak 660 sc provides operators with confidence in their turbidity measurement and plant management.
Spill containment unit
01 December, 2008 | Enware Australia Pty Ltd
The one-piece polyethylene IBC2000i intermediate bulk container (IBC) spill containment unit features a 144 (L) x 142 cm (W) footprint to fit most 1000 L IBC dispensing units. It also includes a 19 L pail holder for quick, easy dispensing into smaller containers.
Tool for SCADA
01 December, 2008 | GE Intelligent Platforms Asia Pacific Pte Ltd
The Water Solution Pack 2008 delivers new tools and functionality for Proficy HMI/SCADA — iFIX users with the addition of an extensive industry-specific dynamo library, NERC-recommended security features and tighter integration with OPS Systems’ Water/Wastewater reporting software.
Siemens Sitrans SL gas analyser
01 December, 2008 | Siemens Ltd
Siemens Sitrans SL is a diode laser gas analyser featuring an inline reference cell filled with a non-interfering reference gas. This allows for a fast and non-contact measurement of gas concentrations in process or flue gases.
Environmental impact calculator
01 December, 2008 | CRC for Construction Innovation
LCADesign is a real-time environmental impact calculator designed for commercial properties.
Plastic ball check valves
24 November, 2008 | Dwyer Omega (Aust) Pty Ltd
The Series BCV are economical, thermoplastic ball check valves suitable for chemical and wastewater applications.
Enviro-tool to benefit rural NSW waste facilities
22 September, 2008 | Office of Environment and Heritage NSW
Small waste operators and the environment will be the main beneficiaries from a new tool designed to improve monitoring of small landfill sites.
The Environment Risk Assessment and Mitigation Package (E-RAMP) aims to address waste operator concerns by helping to assess and manage potential environmental landfill issues.
