Campbell Scientific CR200X series data loggers
01 June, 2010 | Campbell Scientific Aust Pty Ltd
Campbell Scientific has replaced the CR200 series data loggers with the CR200X series data loggers that feature expanded memory for the program and operating system (OS).
Campbell Scientific DMM600 duff moisture meter
01 June, 2010 | Campbell Scientific Aust Pty Ltd
The Campbell Scientific DMM600 duff moisture meter measures volumetric water content of organic forest floor material. It is a portable, battery-powered device that uses measurement methods sensitive to the dielectric properties of the material being measured.
BP Solar Energiser Kit
01 June, 2010 | RFI Technology Solutions
The BP Solar Energiser Kit is an all-in-one solar electricity kit for businesses. Modular and easy to install, it is claimed users will generate more energy from the kit compared to most other modules over the life of the system.
Schott tubing for solar
31 May, 2010 | SCHOTT Australia Pty Ltd
Schott Tubing is a key component within the rapidly growing market of concentrated solar power (CSP). The tubing is used within the infrastructure of a parabolic trough power plant. In order to achieve the necessary temperatures, solar radiation is concentrated in parabolic trough arrays. These troughs are more than 400 m in length and are made of parabolically shaped mirror segments. The troughs track the sun over the course of the day and focus the solar radiation along the focal point of the mirrors onto specially coated, evacuated receiver tubes that convert solar radiation into heat. A heat transfer fluid, which is circulating through the receiver, is heated up to 400°C and then used to generate steam.
Dwyer Series TE Duct and Immersion Temperature Sensor
31 May, 2010 | Dwyer Omega (Aust) Pty Ltd
The Series TE Duct and Immersion Temperature Sensor can be used to monitor air or water temperature throughout a building management system or an air handler unit. Flanged duct sensors monitor the supply or return air and provide a thermistor or RTD output to the digital controller. Immersion sensors, which are supplied with compression fittings, are typically used to monitor the hot or chilled water lines throughout a building. Thermowells are recommended, but not required, on the immersion sensors.
bbe DaphTox II biomonitor
31 May, 2010 | Technical & Scientific Equipment
The bbe DaphTox II is a biomonitor, an enhanced version of the DaphTox, which gives early warning against a wide range of toxic concentrations.
Pelican Pack and Take ‘n Go oil absorbent recycling spill packs
31 May, 2010 | Revolution Materials
The Pelican Pack and Pelican Take ‘n Go are mobile and wall-mounted stations for cleaning up liquid spills. The cotton-based Fibercan absorbs oils, hydrocarbons (eg, petrol, kerosene) and water-based liquids, but using up to eight times less absorbent material than traditional media. Any excess material is separated out and kept for re-use.
Water Maze Innovator coagulation industrial wastewater treatment
31 May, 2010 | Enware Australia Pty Ltd
Water Maze Innovator coagulation industrial wastewater treatment technology is being introduced to Australia by Enware to help users preserve their environment through water remediation and recycling while avoiding hefty disposal costs for untreated water.
Robuschi Biogas Blower range
31 May, 2010 | CAPS Pty Ltd
Robuschi has released the Biogas Blower range, specifically designed for the conveying and compression of biogas, natural gas and landfill gas.
Pulsar Sludge Finder 2 sludge level measurement
31 May, 2010 | Bintech Systems Pty Ltd
Pulsar’s Sludge Finder 2 accurately measures interface levels in primary or secondary settlement tanks and SBR systems. Operating ultrasonically through liquid, the system uses echo processing algorithms to identify the sludge interface level using digital echo processing techniques.
ABB SafeWind switchgear for wind turbines
31 May, 2010 | ABB Australia Pty Ltd
SafeWind slim medium-voltage switchgear is small enough to fit through the narrow doorway of the turbine tower. Designed specifically to meet the switchgear requirements of wind turbine manufacturers for compactness, safety and flexibility, SafeWind is a complete range of secondary distribution gas-insulated switchgear for onshore and offshore applications in the global wind power market.
Bio-Circle bioremedial parts cleaners
31 May, 2010 | Revolution Materials
The Bio-Circle range of bioremedial parts cleaners can clean oily, greasy, dirty machine components without the use of hydrocarbon-based solvents. They are safe to use and have virtually no environmental impact.
ISDL intrinsically safe temperature/humidity data logger
31 May, 2010 | Dwyer Omega (Aust) Pty Ltd
The series ISDL intrinsically safe temperature/humidity data logger accurately records temperatures that range from -40 to 80°C. The easy-to-use DL700 software makes retrieving data simple and allows for user-selectable sampling rates. The device can easily be started and stopped from a PC or delayed to start up to six months in advance.
BASF Ecovio plastic
31 May, 2010 | BASF Australia Ltd
The latest release of the Ecovio range can be used to make 100% compostable and biodegradable plastic bags which meet European standard EN 13432 and Australian standard AS 4736.
LCpro+ portable gas exchange system
31 May, 2010 | Anri Instruments & Controls Pty Ltd
The LCpro+ is an extended CO2 range gas exchange system suitable for both plant physiology and soil science. Designed and manufactured by ADC BioScientific, the unit is now available with either a 0-2000 or 0-3000 ppm CO2 range.
