Vanton Solar Powered Chemical Dosing System
28 February, 2011 | Acromet (Aust) Pty Ltd
The weatherable Solar Powered Chemical Dosing System from Vanton Pump and Equipment Corp features a nonmetallic, peristaltic pump for corrosion-free transfer of caustic and acidic treatment chemicals from an integral thermoplastic storage tank to water and wastewater containment facilities in remote locations.
OnVu ICE time temperature indicator
28 February, 2011 | BASF Australia Ltd
The OnVu ICE time temperature indicator can be used on food packaging to monitor the cold chain for chilled and deep-frozen food. Manufacturers, retailers and consumers will be able to tell at a glance whether ice-cream, pizza, fish or any other products were kept constantly deep-frozen or should rather be discarded because the cold chain was interrupted significantly.
Dwyer AQS-1 AQStick ambient VOC monitor
28 February, 2011 | Dwyer Omega (Aust) Pty Ltd
The AQS-1 AQStick ambient volatile organic compound (VOC) monitor is used to monitor ambient air quality by detecting the VOC content in the air. Some common sources of VOC contamination are carpets, building materials, paints, cleaners and tobacco smoke. Even low concentrations of these compounds can affect building occupants’ comfort. A computer’s USB port provides power for the sensor and the LED lights which change colour in accordance with the ambient air quality.
Dwyer Model 450A-1 digital pocket size carbon monoxide meter
28 February, 2011 | Dwyer Omega (Aust) Pty Ltd
The Model 450A-1 digital pocket size carbon monoxide meter measures the ambient concentration of carbon monoxide (CO) in the environment and displays the measurement on the two-line digital LCD screen. Besides the measurement, the maximum recorded CO value since the last reset is shown. An audible carbon monoxide alarm gives warning of CO levels above 25 ppm. For viewing in poorly lit environments, the built-in back light brightens the display.
Quickbund portable bunding system
28 February, 2011 | Spill Station Australia
Constructed from X-R5, a highly chemical-resistant material, the Quickbund portable bunding system has a variety of applications from mining exploration to mobile generators and bulk liquid transfer. The fold-down wall makes access for trucks, forklifts and pallet jacks easy.
Fluid Components International ST51 air/gas flowmeter
28 February, 2011 | AMS Instrumentation & Calibration Pty Ltd
The ST51 air/gas flowmeter from Fluid Components International (FCI) provides industrial plant engineers with a solution for greenhouse gas (GHG) monitoring and supports the EPA’s BACT (Best Available Control Technology) initiative in the US. The flowmeter is suitable for the measurement and monitoring of industrial plant greenhouse gases. It features a no-moving-parts design that’s non-clogging and operates over a wide flow range with low-flow sensitivity. Packaged in an explosion-proof transmitter, the calibration is matched to the user’s actual gas composition and installation conditions.
Green Machines 500ze lithium-ion powered vacuum street sweeper
28 February, 2011 | Tennant Australia Pty Ltd
The Green Machines 500ze lithium-ion powered vacuum street sweeper is suitable for city centres and pedestrian areas. Due to its near-silent operating mode and zero emissions, it is also suited to clean in sound-sensitive environments such as schools and hospitals in the early morning or late at night. The lithium-ion batteries allow it to run for a full-day working cycle.
Dwyer Instruments SBLT2 submersible level transmitters
17 February, 2011 | Dwyer Omega (Aust) Pty Ltd
The SBLT2 and SBLTX submersible level transmitters, suitable for use in harsh applications, both measure the height of liquid above the position in the tank referenced to atmospheric pressure. The transmitters consist of a piezoresistive sensing element, encased in a 316 SS housing. The bullet-nose design protects the diaphragm from damage.
Grundfos CME Booster constant pressure system
24 January, 2011 | Grundfos Pumps Pty Ltd
The CME Booster is a constant pressure system designed for domestic and light commercial water supply applications. The system features an integrated speed controller that ensures constant water pressure regardless of variations in demand or inlet pressure, providing good pressure creation and control.
Lighthouse Worldwide Solutions LS-60 Liquid Sampler
24 January, 2011 | Particle & Surface Sciences Pty Ltd
The LS-60 Liquid Sampler from Lighthouse Worldwide Solutions is an integrated syringe sampler and optical particle counting system with an easy-to-use Windows-based software interface.
Mueller Accu-Therm plate heat exchanger
24 January, 2011 | Teralba Industries Pty Ltd
Mueller plate heat exchangers can be assembled to suit user requirements. Each exchanger is selected using software to match the specific performance requirements of individual applications. The units also incorporate an expandable design enabling an increase of heat transfer surface area without any changes to the unit footprint.
Spill Station Hardcover Spill Pallet
24 January, 2011 | Spill Station Australia
The Hardcover Spill Pallet with a sump of 410 L is used to store drums in a secure bunded area.
Turner Designs PhytoCyt flow cytometer
24 January, 2011 | Aqualab Scientific Pty Ltd
Turner Designs has introduced the PhytoCyt flow cytometer, a cell analysis system developed in partnership with Accuri cytometers. The system is suitable for applications that monitor the health of marine and freshwater environments.
Micromeritics HPVA-100 high-pressure volumetric analyser
24 January, 2011 | Particle & Surface Sciences Pty Ltd
Particle and Surface Sciences is the sole distributor throughout Australia and New Zealand for the Micromeritics HPVA-100 high-pressure volumetric analyser.
Dywer DX differential pressure switch
24 January, 2011 | Dwyer Omega (Aust) Pty Ltd
The series DX differential pressure switch can be used for low differential pressure indication with setpoint on a decrease of pressure as low as 1 psid (0.07 bar). Differential setpoint ranges are available from 2.5 to 75 psid (0.17 to 5.17 bar) on increasing differential pressure and 1.0 to 67 psid (0.07 to 4.62 bar) on decreasing differential pressure. The unit features a high static pressure rating of 200 psig (13.8 bar) for higher static pressure applications. It comes standard with a weatherproof, UL type 4X enclosure for dust-laden, outdoor or washdown installation environments.
