Dwyer Model 450A-1 digital pocket size carbon monoxide meter
28 February, 2011 | Dwyer Omega (Aust) Pty Ltd
The Model 450A-1 digital pocket size carbon monoxide meter measures the ambient concentration of carbon monoxide (CO) in the environment and displays the measurement on the two-line digital LCD screen. Besides the measurement, the maximum recorded CO value since the last reset is shown. An audible carbon monoxide alarm gives warning of CO levels above 25 ppm. For viewing in poorly lit environments, the built-in back light brightens the display.
Green Machines 500ze lithium-ion powered vacuum street sweeper
28 February, 2011 | Tennant Australia Pty Ltd
The Green Machines 500ze lithium-ion powered vacuum street sweeper is suitable for city centres and pedestrian areas. Due to its near-silent operating mode and zero emissions, it is also suited to clean in sound-sensitive environments such as schools and hospitals in the early morning or late at night. The lithium-ion batteries allow it to run for a full-day working cycle.
Fluid Components International ST51 air/gas flowmeter
28 February, 2011 | AMS Instrumentation & Calibration Pty Ltd
The ST51 air/gas flowmeter from Fluid Components International (FCI) provides industrial plant engineers with a solution for greenhouse gas (GHG) monitoring and supports the EPA’s BACT (Best Available Control Technology) initiative in the US. The flowmeter is suitable for the measurement and monitoring of industrial plant greenhouse gases. It features a no-moving-parts design that’s non-clogging and operates over a wide flow range with low-flow sensitivity. Packaged in an explosion-proof transmitter, the calibration is matched to the user’s actual gas composition and installation conditions.
Dwyer Instruments SBLT2 submersible level transmitters
17 February, 2011 | Dwyer Omega (Aust) Pty Ltd
The SBLT2 and SBLTX submersible level transmitters, suitable for use in harsh applications, both measure the height of liquid above the position in the tank referenced to atmospheric pressure. The transmitters consist of a piezoresistive sensing element, encased in a 316 SS housing. The bullet-nose design protects the diaphragm from damage.
Mueller Accu-Therm plate heat exchanger
24 January, 2011 | Teralba Industries Pty Ltd
Mueller plate heat exchangers can be assembled to suit user requirements. Each exchanger is selected using software to match the specific performance requirements of individual applications. The units also incorporate an expandable design enabling an increase of heat transfer surface area without any changes to the unit footprint.
Lighthouse Worldwide Solutions LS-60 Liquid Sampler
24 January, 2011 | Particle & Surface Sciences Pty Ltd
The LS-60 Liquid Sampler from Lighthouse Worldwide Solutions is an integrated syringe sampler and optical particle counting system with an easy-to-use Windows-based software interface.
Grundfos CME Booster constant pressure system
24 January, 2011 | Grundfos Pumps Pty Ltd
The CME Booster is a constant pressure system designed for domestic and light commercial water supply applications. The system features an integrated speed controller that ensures constant water pressure regardless of variations in demand or inlet pressure, providing good pressure creation and control.
Turner Designs PhytoCyt flow cytometer
24 January, 2011 | Aqualab Scientific Pty Ltd
Turner Designs has introduced the PhytoCyt flow cytometer, a cell analysis system developed in partnership with Accuri cytometers. The system is suitable for applications that monitor the health of marine and freshwater environments.
Micromeritics ASAP 2050 Xtended Pressure Sorption Analyzer
24 January, 2011 | Particle & Surface Sciences Pty Ltd
The fuel cell and its chemical energy source, hydrogen, have received much recent attention as a promising long-term solution to the world’s energy needs. Developing storage technologies involving advanced materials and the conversion of hydrogen to useful forms of energy are of critical importance. A fundamental understanding of hydrogen physisorption/chemisorption processes and adsorption/desorption kinetics is needed to optimise hydrogen uptake and release capacity rates. Knowledge of chemical reactivity and material properties, particularly with respect to exposure under different conditions (air, moisture, etc), needs to be gathered.
MIP Electronics particle emissions measuring equipment
24 January, 2011 | Particle & Surface Sciences Pty Ltd
MIP Electronics develops and manufactures optical measuring instruments for measuring particle emissions in stacks. MIP also delivers a range of equipment for measuring noise, vibration and indoor air quality and other features in the working environment. Particle and Surface Sciences is the sole distributor throughout Australia and New Zealand for the MIP product range.
Dywer DX differential pressure switch
24 January, 2011 | Dwyer Omega (Aust) Pty Ltd
The series DX differential pressure switch can be used for low differential pressure indication with setpoint on a decrease of pressure as low as 1 psid (0.07 bar). Differential setpoint ranges are available from 2.5 to 75 psid (0.17 to 5.17 bar) on increasing differential pressure and 1.0 to 67 psid (0.07 to 4.62 bar) on decreasing differential pressure. The unit features a high static pressure rating of 200 psig (13.8 bar) for higher static pressure applications. It comes standard with a weatherproof, UL type 4X enclosure for dust-laden, outdoor or washdown installation environments.
Micromeritics HPVA-100 high-pressure volumetric analyser
24 January, 2011 | Particle & Surface Sciences Pty Ltd
Particle and Surface Sciences is the sole distributor throughout Australia and New Zealand for the Micromeritics HPVA-100 high-pressure volumetric analyser.
Spill Station Hardcover Spill Pallet
24 January, 2011 | Spill Station Australia
The Hardcover Spill Pallet with a sump of 410 L is used to store drums in a secure bunded area.
WeatherHawk 520 bushfire emergency weather stations
18 January, 2011 | Campbell Scientific Aust Pty Ltd
Fire professionals need powerful, portable technologies to assist in making strategic decisions in times of emergency, for resource planning and for scheduled fire management programs. The WeatherHawk 520 is a simple, quick, monitoring and reporting system that can be used in extreme environments to alert and notify of changing weather conditions. When bundled with a solar power supply, the station can work as a drop-and-run, back-to-base weather station, suitable for multiple placements when real-time reporting is essential.
Straub pipe repair clamp
16 January, 2011 | KCES Pty Ltd
The Straub clamp is used for the safe and reliable sealing of damaged pipes of all pipe materials.
