ABB WaterMaster flowmeter and VeriMaster in-situ verification
24 September, 2010 | ABB Australia Pty Ltd
The electromagnetic WaterMaster flowmeter which is designed specifically for the water, wastewater and effluent sewage markets now has an in-situ flowmeter verification capability. Built into the flowmeter the VeriMaster system has the ability to perform in-situ verification across the full range.
KSB Amamix and Amaprop mixers
24 September, 2010 | KSB Australia Pty Ltd
The direct-drive Amamix series mixer range now comes with higher efficiency, greater achieved flows and increased thrust. The range features an ever clean blade (ECB) propeller design which offers varying pitches and sizes to 630 mm diameter. It also has the added advantage of a reduced diameter hub, tapered seal chamber and three-fold dynamic sealing, including lip seal protection and dual silicon carbide mechanical seals. All these features combined reduce the likelihood of propeller ‘ragging’ and/or mechanical seal failure.
Aerzen Delta Hybrid rotary lobe compressor
24 September, 2010 | Hurll Nu-Way Pty Ltd
The Aerzen Delta Hybrid rotary lobe compressor combines rotary lobe blower and screw compressor technologies. The unit has been designed for oil-free compression of air and neutral gases and finds application in varied industries, such as wastewater treatment plants, food and chemical industries, power generation plants and the pneumatic transport of powders.
Tsurumi KTV submersible dewatering pumps
24 September, 2010 | Australian Pump Industries Pty Ltd
The KTV series of heavy-duty submersible dewatering pumps manufactured by Tsurumi Pump is designed to provide the construction and mining applications with reliability. The series provides capacities of up to 2300 L/min flow and heads as high as 50 m. The complete series of pumps with bores from 50 mm (2″), all the way through to 150 mm (6″) are available in three-phase, 2-pole configuration and standard cast iron body construction.
Palintest industrial water test kits
24 September, 2010 | Palintest Ltd
The Palintest industrial water test kits are a range of all-in-one packages for a wide range of field-testing requirements. The range is designed to bring together all the necessary tools for accurate, quick and easy water testing for a variety of industrial applications.
Dimension Data eWaste management service
24 September, 2010 | Dimension Data Australia
Dimension Data has launched its eWaste management service, a national program that offers environmentally responsible removal, disposal and recycling of electronics materials, ranging from the packaging materials for new products when they are delivered, to equipment at end of life.
ADC BioScientific OS5p chlorophyll fluorometer
24 September, 2010 | Anri Instruments & Controls Pty Ltd
The ADC BioScientific OS5p portable pulse-modulated chlorophyll fluorometer is used for the detailed analysis of plant stress.
Mercoid series 3100 smart pressure transmitter
16 September, 2010 | Dwyer Omega (Aust) Pty Ltd
The Mercoid series 3100 smart pressure transmitter is a microprocessor-based high-performance transmitter which has flexible pressure calibration and push-button configuration, and is programmable using HART communication.
Copa SAF wastewater system
20 August, 2010 | Ovivo
The Copa submerged aerated filter (SAF) wastewater system is designed for the ‘packaged sewerage treatment’ market. It has been modified by EWT to suit Australian requirements.
Ilmap sand filter nozzles
20 August, 2010 | Tecpro Australia
Ilmap filter nozzles are used in the treatment of drinking water, demineralisation, urban and industrial wastewater treatment, desalination plants and the filtration of water for irrigation and swimming pools.
Dimpleflo modular heat exchangers
20 August, 2010 | Teralba Industries Pty Ltd
The Dimpleflo modular heat exchangers can be used to recover energy from any warm or hot product or effluent.
FCI ST98L in-line mass flowmeter
20 August, 2010 | AMS Instrumentation & Calibration Pty Ltd
The ST98L in-line mass flowmeter from Fluid Components International (FCI) provides a reliable flow measurement solution for virtually any air or gas mixture in small process line sizes from 25 to 50 mm.
Source Catchments eWater integrated water modelling suite
20 August, 2010 | eWater Limited
Applying a whole-of-catchment approach to water management is now possible with Source Catchments, the first component of eWater’s integrated water modelling suite, eWater Source, to be publicly released.
GDS404 gas alarm
20 August, 2010 | Anri Instruments & Controls Pty Ltd
The GDS404 is a 1-4 channel gas alarm from GDS Technologies. The versatile system configuration for monitoring any combination of oxygen, combustible and toxic gases meets the requirements for economical and reliable monitoring of gas levels. The unit comes in a steel housing, monitoring in any type of environment from commercial premises through to heavy industrial and hazardous area applications.
SF6 leak detection, thermal imaging and daytime corona imaging service
20 August, 2010 | Mondo
Select Technical Solutions (a division of SP AusNet) has an SF6 leak detection, thermal imaging and daytime corona imaging service that provides added value to greenhouse abatement and asset management plans.
