Products :: Sustainability Matters

Products

Rotork IB Bevel and IS Spur gearboxes

23 March, 2010 | Rotork Australia

The IB Bevel and IS Spur gearboxes are now available to suit aggressive environment service including: buried, submersible, marinised and raw sewage duty. To achieve these ratings, the specifications include: stainless steel fasteners, stainless steel input shaft, two-pack polyamide epoxy surface coatings and an IP68 enclosure rating.

Marexim Xe Hybrid Convertible range of light bulbs

23 March, 2010 | Marexim Lighting & Electrical Technologies Ltd

The Marexim Xe Hybrid Convertible range of bulbs combines the positive efficiency and long life aspects of modern CFL and LED lights with the instant full brightness, colour quality and dimmability of incandescent lights.

Festo MHJ valve series

23 March, 2010 | Festo Pty Ltd

The MHJ valve series has the ability to output very short pulses of air, which can result in energy savings and makes it suitable for various applications. It features a long service life and high precision with direct actuation for the shortest switching times of \<1 ms, flow rates of 50, 100 and 150 L/min and good repetition accuracy of \<0.1 ms.

HSM ProfiPack 400 cardboard waste converter

23 March, 2010 | Renz Masterbind

The HSM ProfiPack 400 is a compact tabletop machine designed to convert cardboard waste into a packaging material for re-use. The waste cardboard is fed into the device which then instantly converts it into an interlaced weave pattern. The packaging material produced is non-slip, easy to bend and provides a good replacement for other types of packaging such as bubble wrap and foam beads.

Imbiber Bead polymer spill capture system

23 March, 2010 | Enware Australia Pty Ltd

The Imbiber Bead spill capture system won’t release waste under any conditions once it has been absorbed. The polymer system - which will absorb a spill without leaching - is suitable for use in waterways as a protective barrier to prevent leakage from land into water or from water onto land.

Spilldoktor URLD sorbent in dispenser carton

23 March, 2010 | Aquasol

The URLD dispenser carton by Spilldoktor provides industry with a roll of efficient sorbent, prepacked on a roll inside a carton. The product is suitable for use as an everyday spill measure and offers industry an extra measure to complement the conventional ‘wheelie bin’ spill kit.

Zallys model M3 bin mover

23 March, 2010 | Warequip

The Zallys range of Italian-made electric tugs has a number of applications.

Exair’s Heavy Duty Dry Vac vacuum cleaner

23 March, 2010 | Compressed Air Australia Pty Ltd

Exair’s Heavy Duty Dry Vac is a rugged, industrial-duty vacuum cleaner that has been engineered to vacuum high volumes of dry materials in less time than ordinary vacs. The wear-resistant design is suitable for the clean-up of abrasive materials like steel shot, garnet, metal chips and sand, yet can be used for general-purpose applications.

Teralba Mixquip heavy-duty mixers

23 March, 2010 | Teralba Industries Pty Ltd

Teralba Industries designs and manufactures the Mixquip range of agitators and mixers. It has now developed models for a larger range of tanks and vessels.

Dimpleflo Shell and Tube Heat Exchangers

23 March, 2010 | Teralba Industries Pty Ltd

The Dimpleflo Shell and Tube Heat Exchangers are now produced in a larger range. This includes heat exchangers with a shell diameter of 2 m and length of 15 m. The picture shows a recently completed Dimpleflo Shell and Tube Heat Exchanger with 400 x 50 mmø dimpled high-efficiency 316 stainless steel heat transfer tubes, housed in a 1500 mmø 304 stainless steel shell.

Drumbeaters range of drum cleaners and crushers

23 March, 2010 | Aquasol

Companies that use bulk liquids, particularly hazardous liquids, usually face the problem of disposing of contaminated 200 L drums and IBC units. In most cases, the drums must be removed by a waste contractor as prescribed waste. This can involve significant costs, particularly in remote locations.