Waste > Monitoring devices

Cerabar S pressure transmitter

22 May, 2008

The Cerabar S with Foundation Fieldbus monitors process efficiency with high speed and accuracy. Since the device acquires the measurement and processes it independently of other data traffic on the bus network, the response time is fast, making it suitable for critical control or safety interlocks.


Waste management software

25 February, 2008

The web-based software Test-Drive is ready to try online at Wastedge.com. It claims to make job management easier and more efficient.


MG140 gas monitor

25 February, 2008

The MG140 is a low-cost gas monitoring solution designed for use in applications where the flexibility of a full-featured multi-gas monitor is not required.


Hydrogen and inert gas analyser

23 January, 2008

The Calomat gas analyser detects the concentration of hydrogen and inert gases in corrosive gases. It measures gas components such as H2, N2, Cl2, HCl or NH3 in binary or pseudo-binary mixes. It is therefore suitable for measuring tasks such as those found in chlorine-alkali electrolysis, steel production and processing, ammonia synthesis, fertiliser production, and also in LNG (liquified natural gas) plants.


Gas monitor with hydrogen sensor

22 January, 2008

The GasBadge Pro single gas monitor now has an electrochemical hydrogen (H2) sensor option. This option will provide a suitable personal monitor to detect hydrogen in the range of 0-2000 ppm in power plants, steel mills, refineries or other areas where low level hydrogen leaks may exist.


Phosphate measurement system

18 December, 2007

The STIP Helios in situ phosphate measurement system is typically used for monitoring the dosing of precipitants and nutrients in wastewater, but is extendable for use in biochemical applications such as fermentation, and even in lower phosphate concentration ranges like drinking water.


Reclassifying mufflers

24 September, 2007

Exair's Reclassifying Mufflers can be installed directly into the exhaust port of cylinders, valves and other air-powered equipment to reduce work-area noise and harmful oil mist. They are easy to retrofit to new and existing installations.


Logger for harsh environments

20 October, 2006

The Almemo 2690.8 handheld data logger is designed for use in harsh environments and is suitable for use with all Almemo environmental and atmospheric monitoring sensors. The instrument includes a shock absorbing rubber cover and is rated at IP54 when used with Almemo waterproof input and output connectors.


Microbial air monitoring

20 October, 2006

The AES Chemunex Sampl'Air enables microbial monitoring of the air through impacting microorganisms onto a standard Petri dish. The high reliability of the sampling is guaranteed by an impacting speed monitoring system.


Calibration station

27 January, 2006

The Cal Plus Calibration Station features simple, two-button operation for quickly and easily calibrating or function (bump) testing the GasBadge Plus Monitor. The large LCD and LED indicators then show whether or not the instrument passed or failed the desired function.


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd