Testo appoints new distributor for Qld and NT
24 September, 2009Testo Australia has appointed Group Instrumentation as a Queensland and Northern Territory distributor for its range of portable flue gas analysers.
Wireless sensor monitor
22 September, 2009Wavesense is a wireless module that allows the user to monitor and control electronic sensors in a variety of emerging smart environments, including industrial, domestic, medical and transportation applications.
Wireless control monitor
22 September, 2009Waveport is a wireless modems family based on the ultra-low-power technology designed by Coronis Systems, called Wavenis.
Ethernet-based energy monitoring system
11 September, 2009 byOneTemp has released the Hobo U30-ETH Remote Monitoring System, an industrial-grade energy monitoring system that provides real-time, remote access to energy and environmental data over any ethernet network.
Green energy and pollution monitoring
11 September, 2009 byThe FCI ST51 and ST98 Flow Meters are used to deliver accurate flow measurement in green electric power co-generation and pollution monitoring/control applications.
Wireless automatic meter reading
25 August, 2009Based on Coronis Systems Wavenis technology, the Waveflow meter monitor provides fast access to current consumption data and automatic warnings about leaks, tampering and consumption profiles for business and residential installations.
Energy management software
28 July, 2009The PowerLogic ION Enterprise 6.0 is a complete energy management solution for energy providers and industrial or commercial operations. It claims to help engineering and management personnel cut energy-related costs, avoid downtime and optimise equipment utilisation.
Energy-efficiency benchmark for reducing carbon emissions
08 July, 2009Leighton Contractors and e3k have teamed up to create the Leighton Energy Efficiency Equations (Le3) for benchmarking the energy efficiency of material transportation.
Partnership to provide visualisation technology
11 June, 2009Autodesk has announced it is partnering with the Clinton Climate Initiative to provide visualisation technology for Project Two Degrees.
Green energy gas flow measurement guide
28 May, 2009 byProcess and plant engineers responsible for green energy production, co-generation electric power, pollution monitoring or environmental compliance will find the Green Energy Gas Flow Measurement Application guide from Fluid Components International (FCI) provides unique solutions to meeting the challenges of precise air/gas flow measurement in clean, wet or dry hydrocarbon-based gases.
Smart energy technology
28 May, 2009 byLa Trobe University’s Centre for Technology Infusion and Melbourne-based semiconductor developer Semitech Innovations have joined forces to deliver a cost-effective solution to energy management through joint venture R&D company EcoEnergy Innovations Pty Ltd.
Thermal imager
27 May, 2009 byThe testo 880 thermal imager, which comes in three different versions, is being used to increase efficiency in buildings. The imager can be used for building thermography to see where heat is being leaked from a building’s insulation. With this knowledge users can maximise the efficiency of the heating system, by minimising heat loss.
IR imaging in building
27 May, 2009 byThe B400 infrared camera is designed for detecting energy loss from buildings. The camera is used to scan equipment and structures and measure and display heat. Thermal images are then produced for monitoring or quantitative temperature analysis.
Lighting energy management
07 April, 2009 byThe Dynalite Ecolinx is a plug-and-play lighting energy management solution for commercial environments. It provides luminaire-by-luminaire dimming and on/off lighting control for the widest range of commercial environments, from small offices to campus-sized installations.
Green energy gas flow measurement guide
02 April, 2009Process and plant engineers responsible for green energy production, co-generation electric power, pollution monitoring or environmental compliance will find the Green Energy Gas Flow Measurement Application guide from Fluid Components International (FCI) provides unique solutions to meeting the challenges of precise air/gas flow measurement in clean, wet or dry hydrocarbon-based gases.
