ECD TC80 total chlorine analyser
01 February, 2023 | AMS Instrumentation & Calibration Pty LtdWith its reagent-less amperometric sensor design, the TC80 Total Chlorine Analyser from ECD eliminates consumables, simplifies installation and reduces maintenance.
Interface Load Button Load Cells
01 September, 2022 | AMS Instrumentation & Calibration Pty LtdThe Interface Load Button Load Cells are one of the smallest load cells in both diameter and height.
Fluid Components International ST Series thermal flow meters
02 June, 2022 | AMS Instrumentation & Calibration Pty LtdThese H2 calibrated flow meters work in many pipe diameters and can go without routine maintenance.
AMS FS10A universal flow switch
01 April, 2022 | AMS Instrumentation & Calibration Pty LtdThis flow switch, made for use in gas and liquid analysis, is rugged, sensitive and easy to use.
KATflow 200 Hand-Held Clamp-On Ultrasonic Flowmeter
01 January, 2022 | AMS Instrumentation & Calibration Pty LtdThe KATflow 200 is a fully portable instrument with a power which is belied by its small size.
Beamex CENTRiCAL calibration test bench
01 October, 2021 | AMS Instrumentation & Calibration Pty LtdThe Beamex CENTRiCAL is designed to provide a better way to perform calibrations in a workshop.
Hawker Electronics conductivity measurement devices
01 June, 2021 | AMS Instrumentation & Calibration Pty LtdHawker Electronics' conductivity measurement devices are designed for a wide range of chemical applications, including wastewater.
Electro-Chemical Devices TC-80 Total Chlorine Analyser
01 February, 2021 | AMS Instrumentation & Calibration Pty LtdThe analyser monitors total chlorine in drinking water, rinse water, cooling water or other fresh water samples.
Fluid Components International ST80 Series Wet Gas Thermal Flow Meter
22 December, 2020 | AMS Instrumentation & Calibration Pty LtdThe ST80 Series Thermal Flow Meter utilises Wet Gas MASSter technology, designed to deliver accurate and reliable measurement in moist, dirty and demanding environments.
Interface load button load cells
01 November, 2020 | AMS Instrumentation & Calibration Pty LtdInterface load button miniature stainless steel load cells are small in size but have a wide range of measuring capacities, from 22 N to 220 kN.
McMenon Averaging Pitot Tube
01 September, 2020 | AMS Instrumentation & Calibration Pty LtdThe McMenon Averaging Pitot Tube is a multiport self-averaging flow meter with a design based on the classical pitot tube concept of fluid flow measurement.
FCI ST80, ST100 and MT100 Thermal Mass Flow Meters
02 July, 2020 | AMS Instrumentation & Calibration Pty LtdThe ST80, ST100 and MT100 Thermal Mass Flow Meters from Fluid Components International (FCI) are suitable for waste-to-energy incineration plants.
Katronic dual-channel flowmeters
01 June, 2020 | AMS Instrumentation & Calibration Pty LtdKatronic adapt dual-channel flowmeters to make the best of the worst flow conditions.
Michell Optidew 501 chilled mirror hygrometer
06 February, 2020 | AMS Instrumentation & Calibration Pty LtdMichell's Optidew 501 chilled mirror hygrometer is designed for use in industrial humidity control and precision laboratory applications.
Katronic KATflow 180 Gas Clamp-On Ultrasonic Transmitter
01 September, 2019 | AMS Instrumentation & Calibration Pty LtdThe Katronic KATflow 180 clamp-on flowmeter for gases is designed to provide reliable clamp-on measurement of gaseous flow.