Noshok 800 Series Platinum Resistance Temperature Transmitter
20 December, 2010 | AMS Instrumentation & Calibration Pty Ltd
The Noshok 800 Series Platinum Resistance Temperature Transmitter is suitable for immediate, accurate temperature measurement in applications including water systems, storage tanks, industrial machinery and machine tools, HVAC systems and refrigeration systems.
FCI ST98L in-line mass flowmeter
20 August, 2010 | AMS Instrumentation & Calibration Pty Ltd
The ST98L in-line mass flowmeter from Fluid Components International (FCI) provides a reliable flow measurement solution for virtually any air or gas mixture in small process line sizes from 25 to 50 mm.
Fluid Components International (FCI) ST75 Flow Meter
04 August, 2010 | AMS Instrumentation & Calibration Pty Ltd
Engineers in search of an accurate flow measurement solution for process gas, fuel gas, inert gas or waste gases as well as air in small line sizes will be pleased to learn that the ST75 Flow Meter from Fluid Components International (FCI) is now ATEX and IECEx approved for safety in hazardous and potentially explosive plant environments.
Fluid Components International (FCI) Model FS10A Flow Switch/Monitor
23 March, 2010 | AMS Instrumentation & Calibration Pty Ltd
With a space-saving design incorporating advanced electronics, the Model FS10A Flow Switch/Monitor from Fluid Components International (FCI) is used for continuously verifying flows within liquid or gas process analyser sampling systems.
Panametrics DF-100E series of oxygen analysers
02 February, 2010 | AMS Instrumentation & Calibration Pty Ltd
The Panametrics DF-100E series of oxygen analysers includes the DF-130E, which is designed to provide reliable, dependable and accurate measurements at an economic price. Depending on the application, the sensor can operate for years without recalibration. The only maintenance requirement is the occasional addition of replenishment solution and an alarm is included. The device offers limited options from plumbing, analog outputs and miscellaneous features.
Fluid Components International gas flowmeter
11 November, 2009 | AMS Instrumentation & Calibration Pty Ltd
The GF90 Mass Flow Meter from Fluid Components International is used for gas measurement applications, such as chlorinated water disinfection systems.
Green energy and pollution monitoring
11 September, 2009 | AMS Instrumentation & Calibration Pty Ltd
The FCI ST51 and ST98 Flow Meters are used to deliver accurate flow measurement in green electric power co-generation and pollution monitoring/control applications.
Temperature measurement for solar industry
11 September, 2009 | AMS Instrumentation & Calibration Pty Ltd
The Ircon line of infrared sensors, linescanners and process imaging systems is designed for temperature monitoring applications in the solar manufacturing industry.
Green energy gas flow measurement guide
28 May, 2009 | AMS Instrumentation & Calibration Pty Ltd
Process and plant engineers responsible for green energy production, co-generation electric power, pollution monitoring or environmental compliance will find the Green Energy Gas Flow Measurement Application guide from Fluid Components International (FCI) provides unique solutions to meeting the challenges of precise air/gas flow measurement in clean, wet or dry hydrocarbon-based gases.
Flowmeter for biofuel and biomethane applications
07 April, 2009 | AMS Instrumentation & Calibration Pty Ltd
Fluid Components International has released its Model ST51 mass flowmeter for owners, operators and manufacturers of biogas production and methane capture and recovery systems. These users will find the unit provides features required of these applications in an explosion-proof instrument that is easy to install, safe and requires virtually no maintenance.
Green energy gas flow measurement guide
02 April, 2009 | AMS Instrumentation & Calibration Pty Ltd
Process and plant engineers responsible for green energy production, co-generation electric power, pollution monitoring or environmental compliance will find the Green Energy Gas Flow Measurement Application guide from Fluid Components International (FCI) provides unique solutions to meeting the challenges of precise air/gas flow measurement in clean, wet or dry hydrocarbon-based gases.
Mass flowmeters
23 November, 2007 | AMS Instrumentation & Calibration Pty Ltd
The ST series flowmeter is designed for rugged environments typically found in the oil/gas, chemical, electric power, pulp/paper and wastewater treatment industries and applications. Its no moving parts, non-clogging flow sensing element provides direct mass flow output and features built-in temperature compensation. It is suitable for use in a wide range of process and plant gas applications, including compressed air, hydrocarbon gases and inert gases. The ST98 flowmeter has a reliable thermal mass flow sensor in a smart electronics package. It operates over a wide flow range from 0.21 to 172 NMPS in air with a standard flow accuracy of ±1% of reading, ±0.5% of full scale. It is suitable for a wide range of air/gas flow measurement applications, including natural gas or methane monitoring, compressed air metering, industrial HVAC systems, nitrogen blanketing and combustion air.
Valve positioner
20 November, 2006 | AMS Instrumentation & Calibration Pty Ltd
The Yamatake SVP300 Alphaplus smart valve positioners are microprocessor-based fieldbus-to-pneumatic valve positioners. They can operate seamlessly with other registered field devices as well as host systems in a wide range of control applications. In addition to fieldbus communication, the unit is equipped with an automatic calibration mechanism to allow easy set-up with various type and makes of valves.
General-purpose pH sensor
27 January, 2006 | AMS Instrumentation & Calibration Pty Ltd
The Barben Analyser Technology (BAT) general-purpose pH sensor is suitable for water, wastewater, cooling towers, boiler feed, and other utility applications where no significant hydrocarbons are present.
Contacting conductivity sensors
19 December, 2005 | AMS Instrumentation & Calibration Pty Ltd
BAT Contacting Electrode Conductivity Sensors are offered in a range of temperature, pressure, chemical compatibility and installation configurations.
