ECD TC-80 Total Chlorine Analyser
28 February, 2017 | AMS Instrumentation & Calibration Pty LtdThe TC-80 Total Chlorine Analyser from Electro-Chemical Devices (ECD) monitors total chlorine in drinking water, rinse water, cooling water and other freshwater samples.
Michell Instruments XZR500 combustion control oxygen analyser
02 February, 2017 | AMS Instrumentation & Calibration Pty LtdThe XZR500 combustion control oxygen analyser from Michell Instruments is designed to monitor the oxygen levels in combustion processes.
Michell Instruments XTC601 gas analyser for hydrogen-cooled generators
21 October, 2016 | AMS Instrumentation & Calibration Pty LtdMichell Instruments has added an analyser dedicated to monitoring hydrogen-cooled electricity generators to its current range of moisture and oxygen analysers. The XTC601 has been designed with three phase profiles to cover all of the gas analysis requirements for operation and maintenance.
Fluid Components International ST51A and ST75A thermal mass flow meters
17 October, 2016 | AMS Instrumentation & Calibration Pty LtdST51A and ST75A thermal mass flow meters from Fluid Components International (FCI) have been evaluated by safety expert Exida and found to meet SIL 1 compliance.
ecom-J2KN series emissions analyser
26 September, 2016 | AMS Instrumentation & Calibration Pty LtdThe J2KN series analyser utilises electrochemical sensors to measure exhaust emissions — most commonly O2, CO, NO, NO2 and SO2 gases — and has an available NDIR bench for measuring CO2, high CO and CH4.
Fluid Components International FS10i Flow Switch/Monitor
06 April, 2016 | AMS Instrumentation & Calibration Pty LtdDesigned for industrial processes, manufacturing operations, pumps, compressed air, gas compressors and HVAC systems requiring flow assurance and alarming, the compact SIL 2 compliant FS10i Flow Switch/Monitor from Fluid Components International (FCI) features good performance and operation.
Electro-Chemical Devices CA-6 UV spectroscopic analysers
04 April, 2016 | AMS Instrumentation & Calibration Pty LtdWater engineers responsible for municipal or industrial water and wastewater will find the single- or dual-parameter CA-6 UV family of spectroscopic analysers from Electro-Chemical Devices (ECD) can monitor any two selected parameters in separate measurement ranges for ammonia, nitrate or chemical oxygen demand (COD 254 nm).
FCI Model ST75V Flow Meter
18 February, 2016 | AMS Instrumentation & Calibration Pty LtdWith its no-moving-parts thermal dispersion mass flow sensing element, a solar-powerable FCI Model ST75V Flow Meter with built-in Vortab flow conditioner provides direct mass flow measurement of a gas site without the additional equipment required with other flow measurement technologies.
Electro-Chemical Devices HCA1 Portable Colorimetric Chlorine Test Kit
18 January, 2016 | AMS Instrumentation & Calibration Pty LtdThe Electro-Chemical Devices HCA1 Portable Colorimetric Chlorine Test Kit is suitable for testing free and total chlorine in drinking water, wastewater, environmental waters, cooling towers and rinse waters in the food and beverage industry.
Michell Instruments HygroCal100 portable humidity verification system
23 November, 2015 | AMS Instrumentation & Calibration Pty Ltd
Michell Instruments has introduced a portable verification system for humidity probes — the HygroCal100. Weighing just 3.2 kg and with a battery life of up to 8 h, the unit is designed with portability in mind.
FCI ST75 Air/Gas Flow Meter for biomass gasification plants
12 October, 2015 | AMS Instrumentation & Calibration Pty Ltd
Process engineers responsible for managing biomass gasification plants will find the ST75 Series Air/Gas Flow Meter from Fluid Components International (FCI) operates in hot, wet, dirty environments to provide measurement of mixed composition gases, including hydrogen, carbon monoxide and trace methane.
FCI ST100L thermal mass air/gas flow meter
10 March, 2015 | AMS Instrumentation & Calibration Pty LtdThe Model ST100L air/gas inline thermal mass flow meter, from Fluid Components International (FCI), is suitable for chlorine gas service and available with an optional built-in Vortab flow conditioner.
Fluid Components International FCI ST100 aeration flow meter
04 November, 2014 | AMS Instrumentation & Calibration Pty LtdThe ST100 flow meter is said to provide accurate performance over a wide flow range, ease of installation, low maintenance requirements and digital bus communications versatility, including Profibus PA compatibility.
Michell Instruments OptiPEAK TDL600 moisture analyser for natural gas
31 October, 2014 | AMS Instrumentation & Calibration Pty LtdMichell Instruments has announced its latest moisture analyser for natural gas - the OptiPEAK TDL600. Using tuneable diode laser spectroscopy (TDLAS) technology, the analyser offers high accuracy with a lower detection limit of less than 1 ppmV.
Katronic KATflow 100 ultrasonic flowmeter
24 October, 2014 | AMS Instrumentation & Calibration Pty LtdThe KATflow 100 is for permanent flow-metering applications. The flowmeter has a reduced specification for applications where the benefits of the KATflow 150 and KATflow 170 are not required.