FCI ST100L thermal mass air/gas flow meter
10 March, 2015 | AMS Instrumentation & Calibration Pty LtdThe Model ST100L air/gas inline thermal mass flow meter, from Fluid Components International (FCI), is suitable for chlorine gas service and available with an optional built-in Vortab flow conditioner.
Fluid Components International FCI ST100 aeration flow meter
04 November, 2014 | AMS Instrumentation & Calibration Pty LtdThe ST100 flow meter is said to provide accurate performance over a wide flow range, ease of installation, low maintenance requirements and digital bus communications versatility, including Profibus PA compatibility.
Michell Instruments OptiPEAK TDL600 moisture analyser for natural gas
31 October, 2014 | AMS Instrumentation & Calibration Pty LtdMichell Instruments has announced its latest moisture analyser for natural gas - the OptiPEAK TDL600. Using tuneable diode laser spectroscopy (TDLAS) technology, the analyser offers high accuracy with a lower detection limit of less than 1 ppmV.
Katronic KATflow 100 ultrasonic flowmeter
24 October, 2014 | AMS Instrumentation & Calibration Pty LtdThe KATflow 100 is for permanent flow-metering applications. The flowmeter has a reduced specification for applications where the benefits of the KATflow 150 and KATflow 170 are not required.
McCrometer V-Cone flowmeter
22 October, 2014 | AMS Instrumentation & Calibration Pty LtdMcCrometer's V-Cone flowmeter is an innovative system for differential pressure flow measurement. Designed for mild to harsh operating environments and for a wide variety of fluids, the flowmeter is claimed to outperform traditional DP devices and other flow technologies.
Vortab Elbow Flow Conditioner
26 May, 2014 | AMS Instrumentation & Calibration Pty LtdThe Vortab Company's elbow flow conditioner eliminates flow meter upstream piping requirements by conditioning the flow stream into a flow regime, mimicking adequate straight run.
McCrometer FPI-X Dual Sensor Electromagnetic Flow Meter
26 March, 2014 | AMS Instrumentation & Calibration Pty LtdProcess and plant engineers contending with swirl and other flow disturbances in the line will find the FPI-X Dual Sensor Electromagnetic Flow Meter from McCrometer delivers accurate and repeatable measurements under extreme flow conditions. The flow meter achieves ±0.5% accuracy under severe swirling flows, as it is designed for use in close proximity to cascading or multiple pump arrays.
FCI ST75 Air/Gas Flow Meter
06 February, 2014 | AMS Instrumentation & Calibration Pty LtdThe ST75 Air/Gas Flow Meter, which measures fuel gas, process gas, inert gas, waste gases and air in small line sizes, is suitable for optimising the fuel-to-air ratio for plant burner-boiler control. The natural gas and air flow measurement provided by the meter allows engineers to monitor and control the precise amount of fuel and air needed to fire burners most efficiently.
FCI Model ST51 Mass Flowmeter
06 December, 2013 | AMS Instrumentation & Calibration Pty LtdFluid Components International's Model ST51 Mass Flowmeter was designed to deliver precise air/gas flow measurements in demanding environments.
Michell Instruments Transportable Condumax II hydrocarbon and water dewpoint analyser
11 September, 2013 | AMS Instrumentation & Calibration Pty LtdMichell Instruments has developed a transportable version of its hydrocarbon dewpoint analyser, enabling engineers to provide a fast response for investigations into the quality of natural gas wherever it is needed. The Transportable Condumax II measures hydrocarbon and water dewpoint in the same way and to the same accuracy as the online version.
Fluid Components International ST102A Air/Gas Mass Flow Meter
15 August, 2013 | AMS Instrumentation & Calibration Pty LtdThe ST102A Air/Gas Thermal Mass Flow Meter from Fluid Components International features a dual-element averaging system, improving installation repeatability and accuracy for larger diameter pipes and ducts.
Vortab flow conditioner products
06 February, 2013 | AMS Instrumentation & Calibration Pty LtdThe Vortab Company manufactures flow conditioners that combine swirl-removal technology with the Vortab flow conditioning process to achieve a repeatable and efficient flow profile.
Noshok 613 Series Cage-Protected Submersible Level Transmitter
08 November, 2012 | AMS Instrumentation & Calibration Pty LtdThe 613 Series Cage-Protected Submersible Level Transmitter is suitable for a variety of industrial and municipal liquid level measurement applications requiring watertight protection.
Mitchell S8000 Remote chilled mirror hygrometer
30 July, 2012 | AMS Instrumentation & Calibration Pty LtdThe Michell range of cooled mirror hygrometers is designed to help to meet requirements for relative humidity measurement from any of the leading environmental control authorities. With accuracies of 0.1°C dp, and based on the fundamental measurement principle which has no inherent drift, the chilled mirror hygrometer S8000 Remote combines flexibility with accuracy exceeding the requirements dictated in the emissions control legislation.
Noshok Valve Product Solutions catalogue
06 June, 2012 | AMS Instrumentation & Calibration Pty LtdNoshok has announced its expanded valve product offering and enhanced valve manufacturing capabilities, available in the Noshok Valve Product Solutions catalogue. The valves, made in the US, have their performance ensured by being 100% helium leak tested to 1 x 10-4 mL/s before they leave the factory.
