FCI ST98L in-line mass flowmeter
The ST98L in-line mass flowmeter from Fluid Components International (FCI) provides a reliable flow measurement solution for virtually any air or gas mixture in small process line sizes from 25 to 50 mm.
Suitable for biogas recovery, food/chemical/pharmaceutical process lines, boilers and burners, the flowmeter combines thermal dispersion mass flow sensing and advanced electronics with exacting fluid calibration in a choice of rugged, industrial enclosures. It comes in two different flow element styles that are application specific. Select the -F style element for applications in dry, clean air/gases with fluid temperatures up to 177°C. The -F design incorporates FCI’s unique equal mass sensor in smaller diameter thermowells for faster response time and improved repeatability in processes with dynamic temperature swings.
The -S style flow element is suitable for demanding applications involving dirty or erosive fluids, high moisture content gas or a pulsating flow. The -S element features more robust, thicker wall thermowells and an unshrouded equal mass sensor element that provides a noise-filtered response, extended erosion resistance and easier cleaning.
In wastewater treatment digesters or landfill gas recovery with wet compressed air or gas with erosive particulates, the -S sensor element provides good accuracy.
The flowmeter provides precision gas flow rate and totalised flow and temperature measurement. It features high accuracy to ±1% of reading, 0.5% of full scale. The unit has repeatability to ±0.5% of reading and is temperature-compensated for accurate measurement under variable environments.
Operating over a flow range from 0.01 to 3140 Nm3/h, the unit features a turndown ratio that is factory preset from 10:1 up to 100:1 within the calibrated flow range and operates at pressures up to 17 bar (g).
Phone: 03 9017 8225
This range of blowers offers high efficiency and low maintenance and is suitable for applications...
Odosense is an active odour analysis and public complaint validation system, which is suitable...
The C Series of industrial multi-tube heat exchangers features a small tube diameter to improve...