Monitoring devices :: Water :: Sustainability Matters

Water > Monitoring devices

Campbell Scientific CS547A conductivity sensor

01 June, 2010 by

The CS547A conductivity sensor measures the electrical conductivity (EC), total dissolved solids and temperature of water and is suitable in most surface water, laboratory and industrial applications.

Campbell Scientific HMP155A air temperature and RH sensor

01 June, 2010 by

The HMP155A is an air temperature and relative humidity (RH) sensor that provides measurements for a wide range of applications and can be used as part of a weather station system or as a single instrument.

Campbell Scientific 109-L temperature probe

01 June, 2010 by

The 109-L temperature probe has been designed to operate with the CR200 range of data loggers. The probe accurately measures the temperature of air, water or soil in a range of applications.

Campbell Scientific DMM600 duff moisture meter

01 June, 2010

The Campbell Scientific DMM600 duff moisture meter measures volumetric water content of organic forest floor material. It is a portable, battery-powered device that uses measurement methods sensitive to the dielectric properties of the material being measured.

Campbell Scientific CR200X series data loggers

01 June, 2010

Campbell Scientific has replaced the CR200 series data loggers with the CR200X series data loggers that feature expanded memory for the program and operating system (OS).

bbe DaphTox II biomonitor

31 May, 2010 by

The bbe DaphTox II is a biomonitor, an enhanced version of the DaphTox, which gives early warning against a wide range of toxic concentrations.

Dwyer Series TE Duct and Immersion Temperature Sensor

31 May, 2010 by

The Series TE Duct and Immersion Temperature Sensor can be used to monitor air or water temperature throughout a building management system or an air handler unit. Flanged duct sensors monitor the supply or return air and provide a thermistor or RTD output to the digital controller. Immersion sensors, which are supplied with compression fittings, are typically used to monitor the hot or chilled water lines throughout a building. Thermowells are recommended, but not required, on the immersion sensors.

Water leak detection

26 March, 2010

Holroyd High School is forty-one years old this year. The school buildings have the usual plumbing ‘issues’ you would expect in a school of this age, including pipes that may be in less than pristine condition.

Panametrics DF-100E series of oxygen analysers

02 February, 2010 by

The Panametrics DF-100E series of oxygen analysers includes the DF-130E, which is designed to provide reliable, dependable and accurate measurements at an economic price. Depending on the application, the sensor can operate for years without recalibration. The only maintenance requirement is the occasional addition of replenishment solution and an alarm is included. The device offers limited options from plumbing, analog outputs and miscellaneous features.

Fisher Scientific

01 February, 2010

Fisher Scientific

Dwyer Instruments series UXF3 ultrasonic flowmeter converters

14 January, 2010 by

The series UXF3 ultrasonic flowmeter converters are paired with series SX1 or SX2 sensors in order to use the transit-time measure method. Using microprocessor-based electronics, the flowmeter can be configured from the front keypad to specific applications.

Dwyer Series WMT multi-jet water meter with pulse output

14 January, 2010 by

The Series WMT multi-jet water meter with pulse output is suitable for commercial and industrial applications.

SonTek Argonaut SW series of acoustic current meters

14 January, 2010 by

Designed with surface-mount electronics and Doppler technology, SonTek’s Argonaut series of acoustic current meters is designed for accuracy in velocity measurements. The meters are available in several configurations, making them suitable for a wide range of applications.

Dwyer Instruments WMT multi-jet water meter with pulse output

14 January, 2010 by

The series WMT multi-jet water meter with pulse output is suitable for commercial and industrial applications. The multi-jet design allows simplicity and accuracy with wide flow ranges, even in low flow applications.

Water sustainability software

10 November, 2009 by

MWH Soft is including vanguard carbon calculation capabilities in all its water modelling product lines. Its Sustainability analysis extension will be available in InfoWorks WS, H2ONET Suite, and H2OMAP Water and InfoWater Executive Suites. The tool gives water utilities energy efficiency management capabilities for reducing both power costs and carbon footprints.