Sulfur hexafluoride detector
25 February, 2008 | Ampcontrol Pty Ltd
The Austech SF6 leak detector is an extractive gas sampling system designed for the continuous detection and monitoring of sulfur hexafluoride (SF6) gas leaks. The product houses an in-built gas sensor which is designed to enhance the detection sensitivity of SF6.
Scott Proton ZM gas monitor
24 February, 2008 | Scott Safety
The Scott Proton ZM (Zero Maintenance) provides up to two years of continuous and maintenance-free protection from exposure to hydrogen sulfide (H2S) or carbon monoxide (CO).
Photometric converter
23 January, 2008 | Lear Siegler Australasia Pty Ltd
The Optek C4000 is a photometric converter engineered for performance and advanced multifunction process monitoring and control. It supports bi-communication, 4-20 mA, four relay outputs and eight I/O product/range changes. It has a built-in data logger and split graphical/numerical displays.
USB charger for battery
23 January, 2008 | Sanyo Oceania Pty Ltd
Sanyo has expanded its eneloop rechargeable battery range with the launch of a USB charger set, the NCMDU01, which allows users to charge the batteries via a USB port commonly found on personal computers and laptops.
Hydrogen and inert gas analyser
23 January, 2008 | Siemens Ltd
The Calomat gas analyser detects the concentration of hydrogen and inert gases in corrosive gases. It measures gas components such as H2, N2, Cl2, HCl or NH3 in binary or pseudo-binary mixes. It is therefore suitable for measuring tasks such as those found in chlorine-alkali electrolysis, steel production and processing, ammonia synthesis, fertiliser production, and also in LNG (liquified natural gas) plants.
LDO sensor
23 January, 2008 | Aqualab Scientific Pty Ltd
The Hach/Hydrolab LDO sensor is approved by the EPA. It uses a sensor cap that is coated with a luminescent material. Blue light from an LED strikes the luminescent chemical on the sensor, which instantly becomes excited. As the excited chemical relaxes, it releases red light. The higher the oxygen concentration, the less red light given off by the sensor cap. The red light is detected by a photo diode. The time it takes for the chemical to return to a relaxed state is measured.
Vortex flowmeters
23 January, 2008 | Endress+Hauser Australia Pty Ltd
Proline Prowirl 72/73 flowmeters can be used for the accurate and reliable measurement of steam.
Waste rippers
23 January, 2008 | ITs Green
Satrind T200 and T400 waste rippers used to process bulky hard waste or household waste to a form that allows it to be used as an alternative fuel stream or for further processing such as optical separation or sorting.
Data acquisition and analysis
23 January, 2008 | Thermo Fisher Scientific
The Dimension 4i from LDS Test and Measurement is a data acquisition system that combines high-speed, gap-free data recording with real-time FFT analysis. The time and frequency domain system brings together the technologies of Nicolet, Gould and Dactron.
Particle counter for oil
23 January, 2008 | Particle & Surface Sciences Pty Ltd
The Pola 200 particle counter is suitable for a wide range of both aqueous and non-aqueous liquids.
Backflow prevention device
23 January, 2008 | Philmac Pty Ltd
The Watts Water Technologies range of backflow prevention devices stops the reverse flow of contaminated water in piping systems from entering the potable water supply.
Gas monitor with hydrogen sensor
22 January, 2008 | Industrial Scientific Corporation
The GasBadge Pro single gas monitor now has an electrochemical hydrogen (H2) sensor option. This option will provide a suitable personal monitor to detect hydrogen in the range of 0-2000 ppm in power plants, steel mills, refineries or other areas where low level hydrogen leaks may exist.
On-site disinfectant preparation
01 January, 2008 | Grundfos Pumps Pty Ltd
Oxiperm systems safely produce a 2% chlorine dioxide (ClO2) solution from commercial sodium chlorite (NaClO2) solution and hydrochloric acid (HCl) on site.
Straub repair clamp
18 December, 2007 | KCES Pty Ltd
The Straub-Clamp is used for the safe, reliable repair of gas, water and drainage pipes made from a range of materials (steels, cast iron, ductile, iron, fibre cement, GRP, PE, PP, ABS, PVC).
Wireless starter kit
18 December, 2007 | Emerson
The Emerson Process Management Wireless SmartPack starter kit is a configurable suite of wireless technologies and services that provides users with an easy way to experience wireless technologies in their own facilities. The packs come pre-configured out of the box to immediately form a secure, robust, self-organising wireless network which users can apply to gain experience with wireless without committing their infrastructure.
