Computerised water conditioner
22 February, 2007 | Hydrosmart International Pty Ltd
Salinity, calcium, iron, scale, algae, blue green algae and a variety of chemical problems are being successfully overcome within both Australia and Asia by individuals, farmers, councils, golf courses and industries that are adopting Hydrosmart's computerised water conditioner. The system uses a unique particle physics approach of treating water with only a set of frequencies to bring about significant changes in water's behaviour.
Centrifugal evaporators
22 February, 2007
Genevac's range of centrifugal evaporation systems is designed to provide reliability and resistance to the most common solvents and acids used within chemistry laboratories.
Ultrasonic flowmeter for water
22 February, 2007 | Endress+Hauser Australia Pty Ltd
The Prosonic Flow 91W clamp-on ultrasonic flowmeter is designed for the water and wastewater industries. It is also designed to meet the requirements for hot and cold water applications. It can be installed on all pipe systems used for water services including mild steel, stainless steel, ductile iron, PVC, PE and GRP, among others.
Ducting for welding fumes
22 February, 2007 | Eximo
WeldFlex ducting is made of the PVC-coated polyester fabric that not only facilitates the removal of toxic welding fumes; it is also suitable for air-conditioning systems, the suction of air and the removal of light dusts in most industries. The product is grey in colour and has a temperature resistance ranging from -30 up to 100°C.
moviBoost pressure systems
22 February, 2007 | KSB Ajax Pumps
The moviBoost pressure systems consist of multiple Movitec vertical multistage stainless steel pumps, mounted on a common base plate together with stainless steel suction and discharge manifolds complete with valves.
Waterproof photometer
22 February, 2007 | Palintest Ltd
The 7100 portable photometer for water analysis replaces the Photometer 5000 and enables advanced instrumental analysis of an extensive range of water tests. It is portable, fully waterproof, floats and is rugged in design. It is also easy to use, provides quick accurate test results and is suitable for on-site testing in any application.
Solution for hazardous solid wastes
29 January, 2007 | ITs Green
Evashred Shredders has an updated range of mobile shredders and accessories to improve the automation during hazardous waste collection. At the centre of its technology is its EV60C Shredder. A range of accessories to automate pick-up and handling for the operator/driver is also available.
Electric cable recycling
29 January, 2007 | ITs Green
Guidetti Srl has developed a range of compact electric cable recycling units. Each of the Sincro units accepts copper cored electric cable and after processing and sorting they provide PVC and the copper granules. The cable pieces are fed into the hopper and there is no need for further labour input.
Campbell Scientific CR800 series data loggers
28 January, 2007 | Campbell Scientific Aust Pty Ltd
The CR800 series data loggers are a complete measurement and control system designed to take over from the previous CR510 data logger. The two data loggers are suitable for small to medium long term or remote applications, but with added peripherals can be used in large projects.
Eletro-pneumatic positioner
28 January, 2007 | Burkert Fluid Control Systems
The SideControl Positioner Type 8635 is an electro-pneumatic positioner designed for use with pneumatically-actuated process valves, with linear or part-turn actuators. Operating with a wide ambient and media range -25 to +60°C, and pressure 1.4 to 6 bar, the device has an airflow capacity of 55 L/min (at 1.4 bar), a linear range 3-130 mm and part-turn actuator range 0-120°.
Particle size analyser
28 January, 2007 | Particle & Surface Sciences Pty Ltd
The Elzone II 5390 Particle Size Analyser is developed by Micromeritics. Widely accepted as a primary particle characterisation technique, the electrozone sensing principle is recognised as an effective method of counting and sizing a wide variety of organic and inorganic materials.
Components for sedimentation and clarification
28 January, 2007 | Dotmar EPP Pty Ltd
A plastic and metallic components range from Dotmar EPP is used for clarification systems and sedimentation tanks used by the water, wastewater and industrial, mining and municipal recycling industries.
Pulse valve for dust collectors
28 January, 2007 | Dwyer Omega (Aust) Pty Ltd
Diaphragm pulse valves for pulse jet dust collectors are constructed of robust die-cast aluminium with NBR diaphragms. The valves come in a choice of either the series DCV with an integral solenoid coil or the series RDCV that are to be used with a remote solenoid.
Wet/dry pumping system
28 January, 2007 | Esam Australia
Turbo Smart is a wet/dry vacuum pumping system that constantly senses/monitors the negative pressure generated and adjusts the speed of the vacuum pump to maintain consistent performance, regardless of the ratio of air to liquid being aspirated.
Pipe repair bandage
28 January, 2007 | Marine & Industrial Marketing
Rapp-it Pipe Repair Bandages are now available in a smaller size, measuring 50 mm x 1.5 m. It is suitable for repairing smaller pipes that measure up to 40 mm in diameter. For larger pipes, the bandages are available in a range of four larger sizes.
