Wastewater

DAF pump saves capital, energy and maintenance costs

26 May, 2015 | Supplied by: Hydro Innovations

A single DAF (dissolved air floatation) pump is said to be able to replace the entire air bubble system on DAF plants, according to pump supplier Hydro Innovations.


Fluid Imaging Technologies FlowCAM imaging particle analysis system

20 May, 2015 | Supplied by: Kenelec Scientific Pty Ltd

The FlowCAM imaging particle analysis system is a tool for detecting, identifying and quantifying algae or problem particulate matter in water treatment processes.


Calix ACTI-Mag SP60 spray coating for sewers

15 May, 2015 | Supplied by: Calix Limited

Calix's ACTI-Mag SP60 is a concentrated, controlled-viscosity, concentrated, stabilised suspension of magnesium hydroxide (MgO). The product is hydrated from Calix reactive MgO, imparting a good neutralisation capability due to the high surface area.


Wastewater purification in 2.5 minutes

28 April, 2015

Engineers from Jhostoblak Corporate in Mexico have created technology to recover and purify seawater or wastewater, regardless of the amount of pollutants and microorganisms, in just 2.5 minutes.


Wastewater re-use using UV disinfection

16 April, 2015 | Supplied by: Fluidquip Australia

The UV disinfection industry has experienced tremendous growth over the last 25 years - particularly in Europe, the USA and South-East Asia. The development of new UV technologies over this period is a perfect example of an industry investing to meet market demand - in this case, demand for an effective, low-cost and environmentally friendly way to disinfect wastewater for re-use.


CNP AirPrex struvite removal and biosolids enhancement process

16 April, 2015 | Supplied by: Hydroflux Industrial Pty Ltd

AirPrex technology, by German group CNP, provides a struvite removal and biosolids enhancement process. It removes struvite (magnesium ammonium phosphate) from anaerobically digested sludge streams, thus eliminating potential pipe blockages and mechanical issues without increasing chemical use.


Furphy Engineering Robotic Tank Inspection Technology

01 April, 2015

Furphy Engineering has introduced the Robotic Tank Inspection Technology, which is claimed to increase safety, reduce risk and improve the accuracy of tank inspections.


Pump provides sustained operating efficiencies

01 April, 2015 | Supplied by: Xylem Water Solutions Australia Ltd

The key operating requirement for any sewage handling pump is its ability to pass solids without clogging, ie, either a full or a partial clog of the impeller and/or volute.


Hydroflux Hydrothane STP ECSB (External Circulation Sludge Bed) for anaerobic wastewater treatment

27 March, 2015 | Supplied by: Hydroflux Industrial Pty Ltd

The Hydrothane ultrahigh-rate anaerobic process takes organic content within wastewater and generates green energy.


Optimising wastewater treatment plant performance

23 March, 2015 | Supplied by: Aurecon Pty Ltd

Wastewater treatment processes have been driven to reduce nutrient concentrations over the past couple of decades to improve receiving water quality particularly in inland waterways. This has led to the installation of complex and often energy-intensive processes. Recently, focus has been on optimising existing treatment processes both in terms of energy usage and plant performance to maximise performance, capacity and operation of the plants.


Energy-efficient sewage pump system reduces blockages

13 March, 2015 | Supplied by: Xylem Water Solutions Australia Ltd

Queensland water authority Unitywater has installed a new pump and controller partner system at seven of its sewage pump stations, in order to reduce blockages and save energy.


Australian-invented technology tackles odours at meat processor

12 March, 2015 | Supplied by: BioGill Operations Pty Limited

When producing specialty meat products and fresh food, it is common for odours to be generated in the production cycle. This was the case at the Illawarra Meat Company where hams, sausages and other smallgoods are processed.


Pentair Southern Cross SX40 solids vacuum pump

06 March, 2015

The Pentair Southern Cross SX40 composite slurry pump is designed as a lightweight unit for the transfer of light slurries and being a 100% composite vessel material allows for pumping of extremely aggressive and corrosive slurry products.


Pentair Southern Cross SX40 solids vacuum pump

06 March, 2015 | Supplied by: Pentair

The Pentair Southern Cross SX40 composite slurry pump is designed as a lightweight unit for the transfer of light slurries and being a 100% composite vessel material allows for pumping of extremely aggressive and corrosive slurry products.


Research provides solutions for proactive sewer corrosion and odour management

04 March, 2015 by Josef Cesca, Regional Technology Manager, CH2MHILL, Zhiguo Yuan Centre Director | Supplied by: CH2M Hill

The Sewer Corrosion & Odour Research Project (SCORe) has uncovered beneficial tools and innovative technologies to help water utilities manage odour and corrosion issues within sewer systems.


  • All content Copyright © 2019 Westwick-Farrow Pty Ltd