Directory Search



Endress+Hauser Australia Pty Ltd


Website: http://www.endress.com.au
Email: info@au.endress.com
Phone: 02 8877 7000
Fax: 02 8877 7099
Address:
Unit 12/277 Lane Cove Road , North Ryde NSW 2113 (Directions)

Products

Endress+Hauser Memosens CCS51D free chlorine sensor

The Memosens CCS51D amperometric sensor from Endress+Hauser measures free chlorine in drinking water, process water, water and wastewater treatment, cooling water and all utilities requiring clean and treated water.

Endress+Hauser Liquiline System CA80AM colorimetric analysing system

Endress+Hauser has launched a colorimetric analysing system for ammonium.

Endress+Hauser Proline t-mass 150 gas flowmeter

Endress+Hauser has released the Proline t-mass 150 thermal mass flowmeter for measuring gases such as compressed air, nitrogen, carbon dioxide and argon. The flowmeter measures mass flow, gas temperature, free air delivery and corrected volume - all without the need for pressure or temperature compensation.

Endress+Hauser Proline Prosonic B 200 ultrasonic biogas flowmeter

Endress+Hauser has introduced the Proline Prosonic B 200 ultrasonic flowmeter for measuring the flow rate and methane content of wet biogas, landfill or digester gas, and other types of low-pressure, wet or contaminated gas.

Endress+Hauser energy management systems

An automatic Energy Monitoring Information System (EMIS) close to the point of use is simple and cost-attractive to set up, and enables the continuous monitoring and targeting of energy efficiency.

Endress+Hauser TOCII CA72 analyser

The continuous and batch monitoring of TOC (total organic carbon) in industrial wastewater is now much simpler and more cost effective with the TOCII CA72 analyser. Industrial, manufacturing and process plants need to be extremely careful in treating their wastewater. The TOC levels must be carefully monitored and the wastewater adequately treated before being discharged into the municipal system. Too-high levels result in severe penalties.

Inline analyser

The in situ measurement of ammonium and nitrate is now possible with the ISEmax CAS40. The robust inline probe is claimed to be able to reduce the energy costs associated with aeration systems in nitrification and denitrification processes in wastewater treatment.

Wastewater analyser

Endress+Hauser has launched an inline analyser for municipal and industrial wastewater treatment plants. The STIP-scan device reduces costly sampling and maintenance procedures by operating directly in the process.

Cerabar S pressure transmitter

The Cerabar S with Foundation Fieldbus monitors process efficiency with high speed and accuracy. Since the device acquires the measurement and processes it independently of other data traffic on the bus network, the response time is fast, making it suitable for critical control or safety interlocks.

High-accuracy flowmeter

The latest release of the Promass F Coriolis mass flowmeter offers accuracy and reliability, making it suitable for use in most process industries.

Vortex flowmeters

Proline Prowirl 72/73 flowmeters can be used for the accurate and reliable measurement of steam.

Phosphate measurement system

The STIP Helios in situ phosphate measurement system is typically used for monitoring the dosing of precipitants and nutrients in wastewater, but is extendable for use in biochemical applications such as fermentation, and even in lower phosphate concentration ranges like drinking water.

Temperature transmitter

Endress+Hauser's iTemp TMT125 is an economical solution for multi-temperature measuring points as found in distillation columns and bioreactors, as well as for normal process plants. The temperature transmitter features eight input channels for resistance thermometers (RTD), thermocouples (TC), resistance (W) and voltage transmitters (mV) and each input can be configured individually.

Ultrasonic flowmeter for water

The Prosonic Flow 91W clamp-on ultrasonic flowmeter is designed for the water and wastewater industries. It is also designed to meet the requirements for hot and cold water applications. It can be installed on all pipe systems used for water services including mild steel, stainless steel, ductile iron, PVC, PE and GRP, among others.

Level and flow measurement

The Prosonic S FMU90 is a heavy industry ultrasonic level and open channel flow measuring system. It is suitable for accurate level measurement of bulk liquids and solids and replaces the Prosonic FMU 860/1/2 family.

Flowmeters

Endress+Hauser has launched the high-accuracy, high-speed Dosimass (Coriolis) and Dosimag (electromagnetic) flowmeters.

Level limit detection in bulk solids

The storage and handling of bulk materials such as grain, flour and plastic pellets can be a high-risk activity and demands accurate and reliability level limit detection. A poorly designed high level limit switch may cause an overflow or a spill leading to wastage with an adverse financial and environmental impact. On the other hand, unreliable low-level measurements may cause inventory problems that negative affect a company's bottom line.

News

E+H employees run for water access

Endress+Hauser employees have run and walked more than 2300 km to fund a water aid project in the Vietnamese province of Kon Tum.

Categories

Brands

  • All content Copyright © 2019 Westwick-Farrow Pty Ltd