Getting smart with 'plug-and-play' water quality monitoring

Thursday, 04 April, 2019 | Supplied by: Burkert Fluid Control Systems

Kempsey Shire Council decided to update its time-consuming water quality monitoring with a smarter ‘plug-and-play’ solution for its water and wastewater services.

Located 350 km north of Sydney, Kempsey Shire Council uses monitoring stations to ensure water quality standards are being maintained. One such legacy system was equipped with sensors for measuring pH and chlorine. The sensors used reagents to establish measurements; however, it was becoming unreliable and required time-consuming upkeep.

Chlorine sensors are traditionally a high-maintenance monitoring solution, generally requiring a constant routine of replacing parts (membrane caps), upkeep of electrolytes, increased labour and equipment costs. Additionally, the presence of chloramines, either intentional or unintentional, can also have a strong influence on readings, creating errors in free chlorine analysis.

Of greatest concern for the council was the fall-off in accuracy and the need for frequent recalibration.

The solution

The council compared a number of alternative systems and decided on the Bürkert Online Analysis System. The compact modular design has an integrated HMI display, input/output modules, a range of available sensor cubes including: pH, chlorine (CI2) or chlorine dioxide (CIO2), conductivity, oxidation reduction potential (ORP/redox) and turbidity; as well as a cleaning system. All of which can be wall or panel mounted, or built into an existing cabinet, which is the solution the council used.

The solution reduced maintenance requirement, diminished drift or need to recalibrate, which were all regarded by the council as essential advantages for its application. The zero effects from chloramines was an added bonus.

Bürkert’s Cl2 and ClO2 sensor cubes contain a high-precision membrane covered amperometric sensor, but the difference is they are based on MEMS (microelectromechanical systems) technology. This microchip allows for precision measurements, with little to no drift as its readings are not influenced by chloramines. These cubes only require small samples for measurements and have a fast response time (t90) of <30s.

Once installed, the individual sensor modules or ‘cubes’ are essentially plug-and-play. It’s a simple process to create alarm parameters for each sensor cube, ensuring that any anomaly in the process is identified quickly.

The results

Greg Morrow, Instrument Technician at the South West Rocks plant of Kempsey Shire Council, commented: “We are very pleased with the new system. Since it was installed, there has been no need to recalibrate the chlorine or the pH sensor cubes. Their performance has been verified using portable laboratory equipment (DPD1 photometer reference test) for free chlorine. Furthermore, the sensors’ response time has been virtually instant, far exceeding the performance of the alternatives we looked at.”

Bürkert’s Online Analysis System communicates with existing control protocols and with personnel, both on and off site. Any deviation from the set criteria is notified immediately. This integration helps reduce time between a deviation from process parameters and remedial action required to correct the situation.

Tristan Nowland, an Instrument Technician for Kempsey Shire Council, added: “After 10 months in operation, the accuracy has been excellent; there’s no drift in either the chlorine or the pH measurements. Additionally, the amperometric chlorine MEMS sensor chip isn’t affected by chloramines, providing true chlorine analysis. Another major benefit is the cubes are not reagent-based, and so the maintenance requirement for this system is greatly reduced.”

The performance and ease of installation of these systems has prompted the council to install the Bürkert Online Analysis System at several other reservoirs and water treatment plants.

These systems are designed to provide all the analysis data required for most applications — as well as acting as a data logger to provide necessary evidence for maintaining water quality standards.

Image credit: © Merkushev

Phone: 1300 888 868
Related Products

Grundfos SCALA1 intelligent pump control

Grundfos SCALA1 is an all-in-one booster solution designed to achieve customised control over...

GF Piping Systems process control loop for water and wastewater treatment

GF Piping Systems' complete solutions of valves, actuators, sensors, displays and controllers...

Thermo Scientific HAA9 Disinfection By-Products (HAAs) Application Workflow

The application workflow is designed to provide accurate and reproducible determination of...

  • All content Copyright © 2021 Westwick-Farrow Pty Ltd