Diaphragm valve

Friday, 20 October, 2006 | Supplied by: http://www.burkert.com/


The Type 2031 2/2-way diaphragm valve has been designed with modular options and additions for use with water treatment, biotechnology and food and beverage industry applications, particularly cleaning-in-place (CIP) and sterilising-in-place (SIP).

The valve conforms fully with FDA and 3A material and diaphragm requirements, and possesses full Quality Assurance documentation.

It can be specified with standard options for neutral gases and liquids, high purity, sterile, aggressive or abrasive fluids, and viscous fluids. Media temperature is -10 to 150°C and ambient temperature is to 140°C.

There are many standard variations of the valve, including manual and pneumatic actuators, forged or cast stainless steel bodies with varying finishes. The valves come in a Tank bottom variant, with body sizes from DN8 to DN100 and all standard BS, ISO and ASME end connections.

The diaphragm valve is available with DN4-50. The unit diaphragm, available in EPDM, PTFE/EPDM and FKM (on request), maintains hermetical separation of fluid and operating mechanism, and is engineered for zero dead volume.

A full range of modular additions is available, including the TopControl 8630 or SideControl 1067 for remote positioning, 1062 electrical position feedback, stroke limiting module, a 6012 Pilot solenoid valve, and more.

Related Products

ECD OIW80 oil-in-water analyser

The analyser is designed to precisely measure oil over a wide range of 0 to 30 ppm (mg/L) and can...

Armstrong Design Envelope Permanent Magnet (DEPM) pumps

Armstrong Fluid Technology has introduced its extended range of Design Envelope Permanent Magnet...

eWater Systems sustainable cleaning and sanitising system

eWater Systems are designed to replace chemicals by supplying disinfectant, sanitiser and cleaner...


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd