Campbell Scientific CS547A conductivity sensor
The CS547A conductivity sensor measures the electrical conductivity (EC), total dissolved solids and temperature of water and is suitable in most surface water, laboratory and industrial applications.
EC is measured with three cylindrical stainless steel electrodes mounted in an epoxy housing. The electrode configuration eliminates ground loop problems associated with sensors in electrical contact with earth ground.
To reduce electrochemical reactions, minimise corrosion and extend the probe’s life, the electrodes are AC coupled and a bipolar excitation is applied. Temperature is sensed with a thermistor.
The CS547A is easy to clean and resistant to corrosion and has rounded ends to facilitate installation and removal.
For groundwater applications, a weighted option is available to facilitate stand-alone submersion.
Phone: 07 4401 7700
ECD OIW80 oil-in-water analyser
The analyser is designed to precisely measure oil over a wide range of 0 to 30 ppm (mg/L) and can...
Armstrong Design Envelope Permanent Magnet (DEPM) pumps
Armstrong Fluid Technology has introduced its extended range of Design Envelope Permanent Magnet...
eWater Systems sustainable cleaning and sanitising system
eWater Systems are designed to replace chemicals by supplying disinfectant, sanitiser and cleaner...
Learn More
I am interested in Campbell Scientific CS547A conductivity sensor.
Complete the form and a supplier representative will be in touch.
