Furphy Engineering Robotic Tank Inspection Technology
01 April, 2015Furphy Engineering has introduced the Robotic Tank Inspection Technology, which is claimed to increase safety, reduce risk and improve the accuracy of tank inspections.
MSA Tri-Gas sample draw system
09 February, 2015Areas of wastewater treatment plants that are subject to flooding, such as wet wells and influent headworks, are suitable for MSA's Tri-Gas sample draw custom system. The system can monitor oxygen, hydrogen sulfide and combustible gases (methane or petroleum vapours).
MSA TriGard Gas Monitor for chlorine and sulfur dioxide
08 February, 2015The TriGard Gas Monitor detects chlorine, sulfur dioxide, other toxic gases, remote combustible gases and oxygen deficiency or enrichment. The monitors are designed specifically for water and wastewater applications.
MSA TriGard Gas Monitor for chlorine and sulfur dioxide
08 February, 2015The TriGard Gas Monitor detects chlorine, sulfur dioxide, other toxic gases, remote combustible gases and oxygen deficiency or enrichment. The monitors are designed specifically for water and wastewater applications.
Kari M type, S type and C type float switches
04 February, 2015A small Finnish company, Kari, services Australian organisations ranging from municipal water authorities to farming equipment OEMs. The company specialises in the design and the manufacture of level sensing equipment.
Fluid Components International FCI ST100 aeration flow meter
04 November, 2014The ST100 flow meter is said to provide accurate performance over a wide flow range, ease of installation, low maintenance requirements and digital bus communications versatility, including Profibus PA compatibility.
Hach Prognosys real-time control nitrogen system
14 April, 2014Hach's Prognosys is an off-the-shelf RTC-N system which adjusts the nitrification process in real time, helping users meet ammonia control limits while reducing money spent on excessive and unnecessary aeration.
Cerlic sludge blanket and TSS sensors
31 March, 2014Cerlic's range of suspended solids sensors has been developed with industry using near infrared (NIR) transmission of light to actually see suspended solids (>40 μm) in wastewater. With this operating principle, they measure TSS concentration (mg/L or ppm) without the need for colour compensation.
RFID device monitors cross-contamination
13 January, 2014Auckland University of Technology (AUT) has been involved in a project which used radio frequency identification (RFID) technology to identify points of cross-contamination between sewerage and stormwater pipes in the Central Auckland region.
Trafag 8292 series Ex Pressure Transmitter
17 December, 2013The 8292 series Trafag Ex pressure transmitter with thin-film-on-steel sensor technology has a wide pressure measuring range from 0 - +2000 bar.
FCI Model ST51 Mass Flowmeter
06 December, 2013Fluid Components International's Model ST51 Mass Flowmeter was designed to deliver precise air/gas flow measurements in demanding environments.
Remote control for pressure sewer system at Merricks Beach
02 December, 2013iota installed its Surepoint telemetry system to help improve service for the Merricks Beach Backlog Sewer Project which is managed by South East Water.
Hach Sonatax sc with sc200 Profibus controller
08 July, 2013The Hach Sonatax sc with sc200 controller allows users to optimise sludge extraction, manage recirculation and be warned of potential solids washouts or process upset by continuously measuring the sludge blanket level.
Hach Lange AN-ISE sc combination sensor for ammonium and nitrate
08 July, 2013The Hach Lange AN-ISE sc combination sensor for ammonium and nitrate features a probe which uses Cartrical technology.
Cerlic Multitracker wastewater instrument with Multiseries sensors
01 July, 2013Cerlic’s range of portable water/wastewater instruments has expanded to include the Multitracker controller and Multiseries sensors. The handheld device uses plug-and-play sensors for various types of measurement.
