Flow measurement

Wednesday, 23 April, 2008 | Supplied by: Measuring And Control Equipment Pty Ltd

The FloPro Series 3 uses ultrasonic technology to measure water flows practically anywhere. Insertion probes can be used to measure flow in full pipes or strap-mounted sensors do the job in partially full pipes or channels, making it suitable for wastewater plants.
With high accuracy and no moving parts, the device works in clean and dirty water, with minimal maintenance.
Easy-to-use software allows pipe diameters to be changed as required. You can move the instrument from one project to another without having to buy a new sensor.
The device has up to three sensor inputs, allowing users to measure three flows at the same time, in the one instrument.
Analog and digital inputs allow for parameters such as temperature, water quality or rainfall to be recorded in the same unit.
Serial data interfaces such as Modbus, SDI-12, RS232 and RS485 allow easy interfacing of the device to SCADA networks.
Optional telemetry cards, such as a cellular modem or spread spectrum radio, turn the device into a fully remote flow monitor, controller and data management tool.

Online: www.mace.com.au
Phone: 02 9658 1234
Related Products

Kaeser GBS series rotary screw blowers

This range of blowers offers high efficiency and low maintenance and is suitable for applications...

Odosense Odour Emissions Tracking System

Odosense is an active odour analysis and public complaint validation system, which is suitable...

HRS Heat Exchangers C Series heat exchanger

The C Series of industrial multi-tube heat exchangers features a small tube diameter to improve...

  • All content Copyright © 2024 Westwick-Farrow Pty Ltd