ABB WaterMaster flowmeter and VeriMaster in-situ verification

Friday, 24 September, 2010 | Supplied by: ABB Australia Pty Ltd

The electromagnetic WaterMaster flowmeter which is designed specifically for the water, wastewater and effluent sewage markets now has an in-situ flowmeter verification capability. Built into the flowmeter the VeriMaster system has the ability to perform in-situ verification across the full range.

Verification diagnostics monitor and validate across a performance-wide matrix, while the precision flow measurement techniques are employed in the sensor with an octagonal bore at core sizes.

By using the simultaneous and parallel operation of the HART protocol, remote HMI and cyclic data output are all achieved with zero measurement loss during data capture. The unit’s rugged and robust sensors provide a long, productive and maintenance-free asset life. The addition of the VeriMaster software tool enables a printed verification certificate to be produced for regulatory compliance.

The flowmeter is available in meter sizes: 40 – 2200 mm. ’Fit and flow’ data storage inside the flowmeter eliminates the need to match sensor and transmitter in the field. On initial installation, the self-configuration sequence automatically replicates into the transmitter all calibration factors, meter size, serial numbers and customer site-specific settings.

Alarms and warnings are classified in accordance with NAMUR NE107. The meter is also verified to OIML R49 type P requirements to ensure good accuracy and performance of the system by continuous self checking of the sensor and transmitter in the field.

Phone: 1800 602 020
Related Products

Trimec Flow Products TFP006–IF500 Dualpulse paddle wheel flow meters

The meters are designed to cost-effectively and accurately measure the flow of water, water-like...

Thermo Scientific Orion 7070iX Total Residual Oxidant (TRO) analyser

The Thermo Scientific Orion 7070iX Total Residual Oxidant (TRO) analyser is designed to measure...

Kaesar FSG series rotary screw compressor with integrated i.HOC rotary dryer

Kaeser has launched the FSG series of its dry-running rotary screw compressor with integrated...

  • All content Copyright © 2020 Westwick-Farrow Pty Ltd