Polibrid elastomeric polyurethane coating solution
Polibrid 705E is a flexible coating designed to protect concrete and steel in chemical, abrasion and high-impact environments, as well as for encapsulation of rivets, bolts, edges and other surface imperfections.
The Polibrid 705E + geotextile system can be applied to wastewater treatment inlet works to repair concrete sewage holding tanks and treatment structures, coating the inlet works odour-control covers to encapsulate H2S gases.
Despite its corrosive exposure, the lining system has been designed to provide good long-term performance, without any major maintenance required or breakdowns.
The product’s properties make it a good solution for immersion applications in highly corrosive primary and secondary containment environments including wastewater treatment plants; clarifier tanks, lift stations, penstocks and channels; concrete and steel potable water tanks; dam gates, manhole pits and pipelines; steel-bolted tanks; encapsulation of rivets, bolts, edges and other surface imperfections; and chemical storage bunds.
Product features: solvent-free, with zero VOC; high film thickness in a single coat (5 mm + if required); fast and low-temperature curing; low moisture transmission rate; flexible, elastic, crack resistant; impact, abrasion and chemical resistant; suitable for steel and concrete substrates; applied by plural component spray (2:1 mix ratio).
For more information: https://www.international-pc.com/in-focus/Polibrid-705E-au.
Phone: 07 3727 5100
This range of blowers offers high efficiency and low maintenance and is suitable for applications...
Odosense is an active odour analysis and public complaint validation system, which is suitable...
The C Series of industrial multi-tube heat exchangers features a small tube diameter to improve...