Katronic KATflow 180 Gas Clamp-On Ultrasonic Transmitter

Sunday, 01 September, 2019 | Supplied by: AMS Instrumentation & Calibration Pty Ltd


The Katronic KATflow 180 clamp-on flowmeter for gases is designed to provide reliable clamp-on measurement of gaseous flow in applications from high-pressure flow systems to locations where, in the past, clamp-on devices would not have been considered suitable.

The device can be installed on metallic gas pipes where the pressure is far lower than the recognised five-bar minimum, with measurement possible down to atmospheric conditions. This is achieved through a combination of sophisticated electronics, adaptive filtering techniques and innovative signal processing algorithms using digital signal processors.

The device can measure flow of a variety of gaseous media from 0.1 to 75 m/s. The transducer assembly offers both shear and Lamb wave measurements, with a minimum number of sensors, for greater simplicity.

The unit is available for permanent use in both safe and hazardous environments with rugged housings for Zones 1 and 2. The KATflow 180 is easily programmed with a magnetic pen for increased safety and can be positioned on all commonly used pipe materials.

For more information: https://www.ams-ic.com.au/products/flow-gases/katronic-ultrasonic-gas-flowmeters/.

Online: www.ams-ic.com.au
Phone: 03 9017 8225
Related Products

Dwyer Instruments Series IEFB Insertion Thermal Energy Meter

The Series IEFB Insertion Thermal Energy Meter uses electromagnetic technology to measure fluid...

Endress+Hauser Multiparameter handheld Liquiline Mobile CML18

The Multiparameter handheld Liquiline Mobile CML18 from Endress+Hauser is a mobile device for...

Endress+Hauser Turbimax CUS50D sensor

Endress+Hauser has introduced the Turbimax CUS50D sensor, a robust turbidity and suspended solids...

  • All content Copyright © 2020 Westwick-Farrow Pty Ltd