Hawker Electronics conductivity measurement devices

Tuesday, 01 June, 2021 | Supplied by: AMS Instrumentation & Calibration Pty Ltd

Hawker Electronics conductivity measurement devices

Hawker Electronics’ conductivity measurement devices range from the E13 heavy-duty single holder — manufactured in alkaline-resistant phenolic for sewage applications with the facility to adjust the electrode internally ±350 mm to allow for summer and winter variances of level — to the small E14 multiholder in polypropylene, suitable for bund leakage detection, dry wells and header tanks.

Borehole electrodes are also available, with water quality approved cable and mini pressure tight electrode holders. Electrodes are available in different materials to suit a wide range of chemical applications. Holder brackets to steady components such as electrode brackets, insulators, nuts and bolts are also available from stock to ensure that installation onsite is speedy.

Hawker Electronics’ controllers are unique in their design because of their close switching differential. This allows them to operate in contaminated liquids, such as those containing foam, wet rags and sewage. The controllers employ low-voltage AC in the electrode circuit and are available in AC or DC voltage supplies. ATEX and IECEx approved equipment is also available.

Online: www.ams-ic.com.au
Phone: 03 9017 8225
Related Products

Kaeser GBS series rotary screw blowers

This range of blowers offers high efficiency and low maintenance and is suitable for applications...

Odosense Odour Emissions Tracking System

Odosense is an active odour analysis and public complaint validation system, which is suitable...

HRS Heat Exchangers C Series heat exchanger

The C Series of industrial multi-tube heat exchangers features a small tube diameter to improve...

  • All content Copyright © 2023 Westwick-Farrow Pty Ltd