Tanker reception solution
07 April, 2009 byThe Waste and Supervisory Process (WaSP) is used for taking care of tankered liquid waste. It allows users to receive and process any liquid waste efficiently and safely while collecting accurate volumetric data and other details for correct billing.
Laser nephelometer
01 December, 2008Designed specifically to detect changes in turbidity as low as 0.0003 NTU (or 0.3 mNTU) the FilterTrak 660 sc provides operators with confidence in their turbidity measurement and plant management.
Tool for SCADA
01 December, 2008The Water Solution Pack 2008 delivers new tools and functionality for Proficy HMI/SCADA — iFIX users with the addition of an extensive industry-specific dynamo library, NERC-recommended security features and tighter integration with OPS Systems’ Water/Wastewater reporting software.
Lift station and sewer treatment monitoring
01 December, 2008Mace has released its next generation of meters with the FloPro series 3, which uses ultrasonic technology to measure water flows.
Product launch in Asia
05 November, 2008At its recent distributor meeting, Aqua Diagnostic launched its PeCOD COD analyser range across Asia.
Flow measurement
23 April, 2008The FloPro Series 3 uses ultrasonic technology to measure water flows practically anywhere. Insertion probes can be used to measure flow in full pipes or strap-mounted sensors do the job in partially full pipes or channels, making it suitable for wastewater plants.
Oxygen analyser
25 February, 2008The 1630 oxygen analyser has been redesigned to take advantage of advances in solid-state electronics. The new series 1730 has a greater range of features while still retaining its ease of use.
Data acquisition and analysis
23 January, 2008The Dimension 4i from LDS Test and Measurement is a data acquisition system that combines high-speed, gap-free data recording with real-time FFT analysis. The time and frequency domain system brings together the technologies of Nicolet, Gould and Dactron.
On-site bacterial count
23 November, 2007Watercheck is a rapid field test kit that enables users to obtain quantification for total coliforms and E.Coli on site and within a day.
Rapid in-field detection of pathogens
08 November, 2007A combination of biotechnologies has been used to design sensors that can detect the presence of pathogenic organisms or chemical contamination in water, food, industrial or point-of-care situations in less than six hours.
Effluent discharge at chocolate factory
21 May, 2007RS Hydro has been granted a contract to install MCERTS approved flow monitoring equipment at a chocolate factory. The project is based on the flow of discharge from three pipes on the site carrying trade waste
Flowmeter selection for tradewaste
20 October, 2006If your business produces tradewaste, then you have a legal obligation to get Sydney Water's permission (usually a permit) to discharge it to the sewer, and Sydney Water will charge for the amount and type of tradewaste discharged to the sewerage system
Counter for monitoring wastewater outflows
19 June, 2006The CO48 Powered Totalisor is an intelligent counter that generates a total on its 8 digit 10 mm character height LED display from a contact closure or voltage source input. All functions of the instrument are programmable from the front panel by touch buttons with tactile feedback. Variables are stored in EEPROM memory.
Peristaltic hose pumps
27 January, 2006The PeriFlo range of Peristaltic Hose Pumps is now distributed by H2O Rx. The range includes 20 pump models, complete engineered pump systems and UL listed custom controls.
Pump/pressure system selection guide
27 January, 2006Davey Water Products has released Issue No 15 of its comprehensive Product Selection Guide.
