Equipment

Product (34)
  • Turck PT4500 and PT4510 submersible pressure transmitters
    Turck’s PT4500 and PT4510 submersible pressure transmitters are optimised for detecting the level of water or other media with similar density in challenging industrial environments - including in wastewater and irrigation systems, as well as tanks containing liquids such as gas and diesel.
  • Capital Controls Series 70CV3000 Chloromatic Gas Flow Control Valve
    The Capital Controls Series 70CV3000 Chloromatic Intelligent Gas Flow Control Valve is a wall-mounted system designed to control chemical feed in water or wastewater applications.
  • ItN Nanovation CFM Systems for biological wastewater purification
    CFM Systems is a ceramic flat membrane system for biological wastewater purification. Suitable for submerged filtration processes, the ItN Nanovation product is now being introduced to the New Zealand water and wastewater industry. It should be available early 2010 for demonstrations and pilot trials.
  • Wind turbine
    The Aerotek RB900 is a compact, robust wind turbine that is designed for extreme weather conditions. It is built with corrosion-resistant materials and uses a 5-blade stainless steel design.
  • Fluid Components International gas flowmeter
    The GF90 Mass Flow Meter from Fluid Components International is used for gas measurement applications, such as chlorinated water disinfection systems.
  • Water treatment technology
    Creative Water Technology has launched an innovative technology that allows highly contaminated wastewater to be cleaned. The technology was recently recognised by winning Innovic’s International Next Big Thing Award 2009 - Green/Environmental category.
  • Heat exchangers for energy recovery
    In the face of ever-increasing energy costs, many Australian and New Zealand manufacturers and service providers are using the Dimpleflo Modular Heat Exchangers to recover energy from any warm or hot product or effluent.
  • Flowmeter for the water industry
    The Water Master flowmeters are specifically designed for the water, wastewater and sewage markets. The range is available in the most commonly installed flowmeter sizes: 40-300 mm.
  • Heat exchanger
    The Casella 12 m Dimpleflo heat exchanger is a cost-effective solution for applications with limited space requirements. The units are built with 12 m long tubing, therefore fewer bends are needed, resulting in a 30% beneficial saving. Increased performance due to its length and configuration has also provided benefits.
  • Heat exchanger
    The 22 Module Dimpleflo Modubloc heat exchanger with 150 mm flowpath is suitable for use in a large winery. The design provides increased energy efficiencies, with higher heat transfer coefficients and lower pressure drops on the product side, all within a more compact footprint.
  • Wastewater analyser
    Endress+Hauser has launched an inline analyser for municipal and industrial wastewater treatment plants. The STIP-scan device reduces costly sampling and maintenance procedures by operating directly in the process.
  • Plastic ball check valves
    The Series BCV are economical, thermoplastic ball check valves suitable for chemical and wastewater applications.
  • Metering pump with automatic vent
    Gas-emitting media in metering applications can often reduce pump output or even prevent the pumped medium from being delivered. To avoid this situation, the pumps generally need to be bled manually in such applications. This procedure can be performed simply, conveniently and safely by the delta diaphragm metering pump with the new venting module.
  • Self-primer pump
    The Weir Self-Primer (WSP) is a rugged, dependable self-priming end suction centrifugal pump. The pump is suitable for a range of solids-handling jobs where a self-priming application is required. It is available in a 3, 4, 6, 8 or 10" suction/discharge.
  • Activated sludge respirometer
    The latest version of the Strathkelvin Strathtox respirometer can tell users quickly, simply and clearly when the bacteria should be fed less, aerated less and loaded more in an activated sludge or IDEA treatment plant. This is done by measuring their actual respiration rate.
  • Straub pipe repair clamp
    The Straub-Clamp is used for the safe, reliable repair of gas, water and drainage pipes made from a range of materials (steels, cast iron, ductile, iron, fibre cement, GRP, PE, PP, ABS, PVC).
  • Small-sized decanter
    The Aldec 10 small-sized decanter is suited to dewater-ing and thickening needs of small capacity wastewater treatment plants and potable water treatment plants. It is suitable for small and medium-sized industries.
  • Backflow prevention device
    The Watts Water Technologies range of backflow prevention devices stops the reverse flow of contaminated water in piping systems from entering the potable water supply.
  • Wastewater pumps
    The submersible wastewater pumps range of Danish-built PXPumps has a design which is centred around minimising life cycle costs (LCCs). This is achieved by improved hydraulic and electrical efficiencies.
  • Septic tanker receival station
    The Septic Tanker Receival Station is a complete package including flowmeter, control valve, fully automated controller and self-contained screen. It allows councils to control and measure the discharges to their sewage plant.
  • Anti-pollution plugs
    A range of pipe stoppers designed for immediate inflation to prevent pollution of waterways by accidental contamination is being introduced by Air Springs Supply.
  • Submersible pressure transmitter
    The AquiStar PT2X submersible pressure transmitter represents the latest in state-of-the-art level measurement technology. Building on years of successful experience, this industry standard digital RS485 interface device offers great noise immunity, thermal performance and transient protection.
  • Membrane filtration for wastewater
    Sumitomo has released a range of PTFE (polytetrafluoroethylene) membranes designed for water microfiltration and sewage treatment. The MBR (membrane bioreactor) module is suitable for water purification applications such as recycling water for farming and gardening, recycled drinking water, sewage wastewater treatment and recycled industrial water.
  • Fault-finding modules
    Two new modules extend the Allen-Bradley Entek XM series of distributed protection and monitoring tools.
  • Level limit detection in bulk solids
    The storage and handling of bulk materials such as grain, flour and plastic pellets can be a high-risk activity and demands accurate and reliability level limit detection. A poorly designed high level limit switch may cause an overflow or a spill leading to wastage with an adverse financial and environmental impact. On the other hand, unreliable low-level measurements may cause inventory problems that negative affect a company's bottom line.
  • Chopper pump
    Vaughan self-priming centrifugal chopper pumps are suitable for applications in all types of processing industries and in local authority wastewater treatment plants and pump stations where traditional submersible and surface pumps suffer continual clogging problems and pipework blockages.
  • 240 volt single phase mixquip rummager
    Mixquip, the division of Teralba Industries that designs, manufactures and imports liquid mixing equipment, has expanded their range of portable Side Entry Agitators with the release of the new 240 Volt Single phase 'RUMMAGER'.
  • Sludge and viscous products heat exchanger
    Teralba has expanded its range of Dimpleflo Monotube Heat Exchangers to include an (8") 200 mm inner tube.
  • 3D modelling tool for wastewater plant
    Optioneer is a 3D modelling software tool that allows users to 'virtually' design, configure and automatically cost multiple options for a water or wastewater treatment plant at the concept design phase. It can produce process flow diagrams (PFDs) on screen using template icons for more than 100 pieces of plant and equipment. Smart data associated with the PFD icons automatically convey dimensions and shape to the 3D images, and each piece of equipment can be 'dragged' and located into the 3D environment. The process of cutting 3D shapes and sizes into the 3D topography is automatic, as is the calculation of cut and fill volumes for preliminary construction and final trim earthworks surfaces.
  • Backflow prevention
    The RP03 and DC03 series of backflow preventers ensure contaminated water cannot flow back into the public mains supply. Using the RPZ (reduced pressure zone) principle featured in Tyco's existing products and with thorough product redesign has further simplified inline service and minimises spares holding requirements.
  • Wireless starter kit
    The Emerson Process Management Wireless SmartPack starter kit is a configurable suite of wireless technologies and services that provides users with an easy way to experience wireless technologies in their own facilities. The packs come pre-configured out of the box to immediately form a secure, robust, self-organising wireless network which users can apply to gain experience with wireless without committing their infrastructure.
  • Electric actuator for quarter turn valves
    The Biffi F02 is a compact, intelligent, electric actuator which incorporates all the advanced variables needed to provide effective control in large and complex plants.
  • Mixing solution
    Pulsair is a technology that delivers an efficient, cost-effective, low-shear method of mixing. The system injects a powerful pulse of compressed air (or gas) into the vessel in a way that creates a vertical circular mixing motion and the contents of the tank are quickly blended into a uniform mix. The mixture can be held in suspension with sequentially-timed pulses that require little expense of energy.
  • Mixers and flowmakers
    Grundfos has added a range of submersible stainless steel mixers to its existing range of flowmakers and mixers for wastewater and sludge.
News (7)
  • KSB to build a new water and wastewater competence centre in Brisbane
    KSB Australia has finalised its plan to build a new water and wastewater competence centre and a sales and warehouse complex in Brisbane.
  • 100 toilets in Brisbane CBD
    While we laugh at the adventures of Kenny’s World exploring toilets, there are 2.6 billion people, or 40% of the global population, who don’t have any access to safe sanitation. The deaths of 75,000 children could be prevented this year in South-East Asia and the Pacific with access to basic sanitation.
  • NSW industrial gear-unit service facility expanded
    In support of Australia's demanding water/wastewater sector, drives solutions group SEW-Eurodrive has expanded its NSW industrial gear-unit service facility.
  • Global restructure for GL&V
    Liquid/solid separation technology specialist GL&V has restructured it’s worldwide business groups to align its operations more closely with target market segments.
  • Jet device to eliminate manual sludge cleaning
    Cleaning the inside of giant storage tanks at refineries and bulk chemical storage facilities is set to get a whole lot easier, safer and cheaper, with the development of an innovative jet cleaning device.
  • Top five global growth water and wastewater markets announced
    The top five global growth markets for water and wastewater technologies and products are China, India, Mexico, Egypt and Australia, according to technical market research report, The Market for Nonwoven Filter Materials – AVM043B from BCC Research.
  • Radical approach benefits slime control technology
    Two Australian research centres are joining their forces in a radical approach to biofilm control.
Case Study (4)
  • Pumps for effluent treatment plants
    In August this year, the KSB Group signed a framework agreement covering the supply of pumps and mixers for 52 municipal effluent treatment plants in China. The order is for a total of 335 mixers and 466 wastewater pumps of different types and sizes.
  • Software improves processes and data quality
    MidCoast Water (MCW) delivers water and sewage services to the Manning and Great Lakes communities of New South Wales, supplying 11 billion L of water per year to 35,000 households spread over 7000 km2.
  • Wastewater treatment in Melbourne
    Enough sewage to fill 16 Olympic-sized swimming pools is processed each day by Yarra Valley Water treatment plants dotted around Melbourne. And because reliability is everything when it comes to sewage, it seems strange at first that many of the 17 Hurll Nu-Way Aerzen blowers at the front line of treatment are at least 10 years old, with some nearing 30 years of service.
  • Gate required to divert sewage
    Lower Murray Water (LMW) in Mildura required a gate to divert sewage flows to catchment ponds. Darren Bennett from LMW was concerned with the traditional square bottom penstocks that had previously been used to control water flows
© 2010 Westwick-Farrow Pty Ltd. All Rights Reserved. Designated trademarks and brands are the property of their respective owners. Use of this website constitutes acceptance of our Terms and Conditions and Privacy Policy.

Get your FREE membership today - CLICK HERE  |  Log-in