Monitoring devices

Product (37)
  • Dwyer Series ULB ultrasonic solid level transmitter
    The Series ULB ultrasonic solid level transmitter is a direct-install level transmitter designed for non-contact measurement of solid levels. The ULB uses ultrasonic technology paired with automatic temperature compensation to provide reliable and accurate measurements in virtually all conditions. An integrated LCD and four responsive push-buttons allow for quick and easy programming on a simple menu structure. Diagnostic capabilities and a failsafe output signal make the ULB suitable for critical applications.
  • FCI ST98 flowmeter with Vortab Insertion Panel flow conditioner
    The FCI ST98 flowmeter with Vortab VIP conditioner is suitable for wastewater treatment aeration system control.
  • ABB WaterMaster flowmeter and VeriMaster in-situ verification
    The electromagnetic WaterMaster flowmeter which is designed specifically for the water, wastewater and effluent sewage markets now has an in-situ flowmeter verification capability. Built into the flowmeter the VeriMaster system has the ability to perform in-situ verification across the full range.
  • FCI ST98L in-line mass flowmeter
    The ST98L in-line mass flowmeter from Fluid Components International (FCI) provides a reliable flow measurement solution for virtually any air or gas mixture in small process line sizes from 25 to 50 mm.
  • Dwyer Instruments PBLT2 submersible level transmitters
    The PBLT2 submersible level transmitters measure the height of liquid above the position in the tank, referenced to atmospheric pressure.
  • Geotech AEMS automated extraction monitoring system
    Geotech’s AEMS is an automated extraction monitoring system used to measure methane (CH4), CO2, O2, with options for H2S and CO measurement.
  • Pulsar Sludge Finder 2 sludge level measurement
    Pulsar’s Sludge Finder 2 accurately measures interface levels in primary or secondary settlement tanks and SBR systems. Operating ultrasonically through liquid, the system uses echo processing algorithms to identify the sludge interface level using digital echo processing techniques.
  • Macherey-Nagel PF-12 photometer
    Macherey-Nagel has released a photometer, the PF-12, a lower-priced alternative to the more technically advanced 500 D.
  • Thermo Scientific AquaSensors RDO Pro DO sensor
    The AquaSensors RDO Pro DO advanced optical dissolved oxygen sensor, for wastewater monitoring, can be connected directly to a PLC for seamless integration with industrial control systems.
  • Thermo Fisher Scientific Orion Star RDO series optical dissolved oxygen meters
    The Orion Star RDO series of optical dissolved oxygen meters is claimed to ensure accuracy with the least amount of maintenance.
  • Endress+Hauser TOCII CA72 analyser
    The continuous and batch monitoring of TOC (total organic carbon) in industrial wastewater is now much simpler and more cost effective with the TOCII CA72 analyser. Industrial, manufacturing and process plants need to be extremely careful in treating their wastewater. The TOC levels must be carefully monitored and the wastewater adequately treated before being discharged into the municipal system. Too-high levels result in severe penalties.
  • Hawk Sultan 234 series of acoustic wave level transmitters
    The Hawk Sultan 234 series of acoustic wave level transmitters can be powered using loop power (2-wire), 3- or 4-wire sources. The instruments emit an acoustic wave pulse, which is then reflected from the surface of the material being measured. The reflected signal is processed using specially developed software to enhance the correct signal and reject false or spurious echoes. The measured signal is temperature compensated to provide maximum accuracy to the outputs and display.
  • Bintech dissolved oxygen monitor
    The Crius 3200 dissolved oxygen monitor has an optional automatic in situ calibration check that can be set at user-defined time intervals.
  • Consistency meter
    The LQ500 consistency (density) meter provides accurate and reliable measurement of density for various applications.
  • Retractable sensor fitting
    Yokogawa has developed a retractable sensor fitting that offers a flexible approach to online liquid analytical measurements in a wide range of process industries.
  • Inline analyser
    The in situ measurement of ammonium and nitrate is now possible with the ISEmax CAS40. The robust inline probe is claimed to be able to reduce the energy costs associated with aeration systems in nitrification and denitrification processes in wastewater treatment.
  • Tanker reception solution
    The Waste and Supervisory Process (WaSP) is used for taking care of tankered liquid waste. It allows users to receive and process any liquid waste efficiently and safely while collecting accurate volumetric data and other details for correct billing.
  • Tool for SCADA
    The Water Solution Pack 2008 delivers new tools and functionality for Proficy HMI/SCADA — iFIX users with the addition of an extensive industry-specific dynamo library, NERC-recommended security features and tighter integration with OPS Systems’ Water/Wastewater reporting software.
  • Laser nephelometer
    Designed specifically to detect changes in turbidity as low as 0.0003 NTU (or 0.3 mNTU) the FilterTrak 660 sc provides operators with confidence in their turbidity measurement and plant management.
  • Lift station and sewer treatment monitoring
    Mace has released its next generation of meters with the FloPro series 3, which uses ultrasonic technology to measure water flows.
  • Flow measurement
    The FloPro Series 3 uses ultrasonic technology to measure water flows practically anywhere. Insertion probes can be used to measure flow in full pipes or strap-mounted sensors do the job in partially full pipes or channels, making it suitable for wastewater plants.
  • On-site bacterial count
    Watercheck is a rapid field test kit that enables users to obtain quantification for total coliforms and E.Coli on site and within a day.
  • Oxygen analyser
    The 1630 oxygen analyser has been redesigned to take advantage of advances in solid-state electronics. The new series 1730 has a greater range of features while still retaining its ease of use.
  • Effluent management system
    The Rovatti effluent management solutions are reversing a problem situation into a positive management technique for farm owners or managers. Within the dairy industry alone, twice as much effluent is being produced as milk and the treatment of this effluent requires a great deal of planning as environmental agencies are regularly monitoring the agricultural industry to ensure that this effluent is retained within property boundaries and is not discharged into drains and watercourses, and does not contaminate groundwater. Farm operators are required to disperse effluent in an appropriate manner and with the Rovatti management system effluent can be treated and dispersed in a managed manner onto pasture land to act as a natural fertiliser.
  • Ultrasonic level controller
    The Sitrans LUC500 is an ultrasonic level controller that offers advanced duplex lift station control and open channel flow monitoring. Its design integrates common PLC lift station functionalities into one cost-effective unit preconfigured for the user. Once operational it improves efficiency, and reduces energy consumption and maintenance costs by decreasing pump failures and site visits. The unit replaces Milltronics EnviroRanger ERS 500, maintaining the same proven features and benefits.
  • Wastewater flowmeter
    The ADFM (acoustic Doppler flowmeter) Velocity Profiler can measure flow rates in harsh environments and under difficult hydraulic conditions. The ADFM flowmeters use Pulse Doppler to measure true velocity profiles - not an estimated average velocity as with common Continuous Wave Doppler flowmeters.
  • Drive package for water, wastewater and irrigation
    A complete package of complementary products is available with the VLT Aqua Drive from Danfoss Drives. A broad range of VLT MCD100, 200 and 3000 series soft starters suitable for motors up to 1200 kW are available to handle fixed speed applications. These are suitable for operation by the drive in cascade control mode, for example on multiple pump applications.
  • Remote monitoring and data logging
    Data Acquisition Networks (DAN) has introduced an innovative data collection and monitoring system. It allows a single hardware unit to capture multiple channels of field data from virtually any type of sensor, transmitter or instrument and make it available on a secure website.
  • Wireless meter monitoring
    Halytech has released a utility meter monitoring system suitable for all industries. The system can be used with water, gas, electricity and many other types of meters.
  • Automatic water sampling
    The Hach Sigma SD900 sampler controller produces reliable sampling results without time-consuming maintenance.
  • Optical dissolved oxygen sensor
    The YSI ROX is a luminescent-based dissolved oxygen sensor which enables users to make long-term oxygen measurements in severe fouling and low oxygen environment. It features a self-cleaning, wiper system to provide anti-fouling in even the most hostile environments.
  • Environmental data loggers
    The dataTaker DT80 and DT85 data loggers, with support for multiple SDI-12 sensor networks, Modbus communications and web-enabled features, are suitable for environmental monitoring projects.
  • Temperature transmitter
    Endress+Hauser's iTemp TMT125 is an economical solution for multi-temperature measuring points as found in distillation columns and bioreactors, as well as for normal process plants. The temperature transmitter features eight input channels for resistance thermometers (RTD), thermocouples (TC), resistance (W) and voltage transmitters (mV) and each input can be configured individually.
  • Water quality monitoring
    The YSI model 600XL-V2 and 600XLM-V2 water quality sondes have a 40 mm diameter and are suitable for groundwater monitoring, shallow water applications and spot checking routines due to their lightweight and compact design.
  • Data acquisition and analysis
    The Dimension 4i from LDS Test and Measurement is a data acquisition system that combines high-speed, gap-free data recording with real-time FFT analysis. The time and frequency domain system brings together the technologies of Nicolet, Gould and Dactron.
  • Multi-gas monitor with colour display
    The MX6 iBrid is a full-featured multi-gas monitor. The user-friendly design of the unit features a full-colour liquid crystal display and 5-way navigation button to scroll through the menu-based operating system.
  • Conductivity temperature sensor
    The Instrumentation Northwest AquiStar CT2X is a submersible conductivity/temperature sensor which has built-in data logging and stores over 100,000 records of conductivity, temperature and time data. It operates on low power and features easy-to-use software with powerful features.
News (4)
  • Sustainable farming project expands
    An Australian first, Project Catalyst provides economic support to sugarcane farmers to trial and adopt cutting-edge sustainable farming practices in a bid to reduce the environmental impact that sugarcane production has on the Great Barrier Reef.
  • Product launch in Asia
    At its recent distributor meeting, Aqua Diagnostic launched its PeCOD COD analyser range across Asia.   
  • Young Water Scientist Award 2007
    A new way of prioritising freshwater rivers for restoration and conservation has won Dr Simon Linke, a researcher with the University of Queensland and eWater CRC, the Riversymposium Young Water Scientist Award for 2007.
  • Rapid in-field detection of pathogens
    A combination of biotechnologies has been used to design sensors that can detect the presence of pathogenic organisms or chemical contamination in water, food, industrial or point-of-care situations in less than six hours.
Case Study (5)
  • Sludge-level monitoring
    Pulsar Process Measurement provides solutions for sludge-level monitoring on primary tanks, secondary tanks and SBRs. The Pulsar Sludge Finder 2 is suitable for primary and secondary settlement tanks, clarifiers, stationary and travelling bridge applications, gravity thickeners, reactor clarifiers, DAF thickeners, sequential batch reaction tanks and industrial process thickeners.
  • Wastewater facility saves energy and water
    The pristine waters of the scenic Fraser coast, about 250 km north of Brisbane, are a popular playground for migrating humpback whales and dolphins. The UNESCO World Heritage-listed Fraser Island is the largest coastal dune system and sand island in the world and home to myriad rare and protected wildlife species. And Hervey Bay, an internationally renowned holiday destination, has an aquatic environment teeming with marine life.
  • Water management solution for council
    The Upper Hunter Shire Council (UHSC) presented some interesting problems when it had a need for a high-tech solution to its water management and control for the townships of Aberdeen and Scone, with possible future expansion within their 2.9 million hectare jurisdiction. A previous supervisory control and data acquisition (SCADA) network was well overdue for upgrade and the latest environmental laws meant that dramatic changes and demands on water management had occurred since the original installation.
  • Sydney Water’s liquid waste management
    A new initiative by Sydney Water is being implemented to manage liquid trade waste.
  • Effluent discharge at chocolate factory
    RS Hydro has been granted a contract to install MCERTS approved flow monitoring equipment at a chocolate factory. The project is based on the flow of discharge from three pipes on the site carrying trade waste
© 2012 Westwick-Farrow Pty Ltd. All Rights Reserved. Designated trademarks and brands are the property of their respective owners. Use of this website constitutes acceptance of our Terms and Conditions and Privacy Policy.

WFonline: Vital and informative media
Get your FREE membership today - CLICK HERE  |  Log-in